Ericsson LZT-1872R1A manual Sending a Manually Entered Individual Call

Page 32

If the signaling is unsuccessful, the radio will remain in the Special Call Mode and sound the appropriate alert tone(s).

5.When the Call is complete, double click the SHIFT/CLR/MONITOR button to exit the Special Call mode and return to the normal System/Group display.

The radio is also capable storing and/or recalling up to 10 individual and 10 interconnect numbers in 2 separate storage locations. These numbers are manually entered and recalled from the keypad.

SENDING A MANUALLY ENTERED INDIVIDUAL CALL

1.Press the 5key to put the radio into Special Call mode. The display displays the last accessed Special Call name/number from the pre-programmed

Special Call selection. The PHONE and status flags will also be illuminated while in the Special Call mode.

2.Enter the ID number of the radio to be called. The last digit entered will always be displayed in the far right hand side of the display. Any previously entered digits will scroll left. Only the last seven characters will be visible at a time with the leading character scrolling off the display upon each new key Ientry. To backspace and clear a digit, press the

key.

32

Image 32

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers