Ericsson LZT-1872R1A manual

Page 34

selection. The PHONE and status flags will also be illuminated while in the Special Call Mode.

2. Enter the telephone number to be called. The last

manually from the keypad, press thenumberkey.

digit entered will always be displayed in the far right hand side of the display. Any p eviously entered digits will scroll left. Only the last seven digits will be visible at a time with the leading digit scrolling off the display upon each new key entry. To backspace and clear a digit, press the skey.

NOTE

To recall the last interconnect entered

3.Complete the telephone entry by pressing the * key. The *key indicates the digits are for an interconnect call. This will not be displayed but a tone will sound.

4.Press and release the PTT bar to initiate the call. The radio performs the necessary signaling required to obtain a working channel. When the signaling is successfully completed the BUSY flag lights and the proper DTMF tones will be sent and heard at the speaker. If the interconnect signaling is unsuccessful, the radio will remain in the Special Call Mode and sound the appropriate alert tone(s).

5.When someone answers, press the PTT bar and speak directly into the microphone. Release the

34

Image 34

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers