Ericsson LZT-1872R1A manual Press and hold the SHIFT/CLR/MONITOR button, Sending a Special Call

Page 30

1.Press and hold the SHIFT/CLR/MONITOR button.

2.Use the SELECT <or >buttons to adjust the squelch. Pressing the SELECT <will open the squelch and pressing the SELECT >will close the squelch.

NOTE

The radio must be on a Conventional System or an EDACS working Channel (i.e. receiving a voice call) to adjust the squelch. It is recommended to adjust squelch from a Conventional System.

SENDING A SPECIAL CALL

1.Press the Skey to put the radio into Special Call mode and provide access to a pre-programmed special call alpha-numeric list. Each selection from the list is pre-programmed with either an individual number or an interconnect number. If programmed, the special call alpha-numeric will be displayed. The

PHONE and status flags will also be illuminated while in the Special Call mode.

2.Press the SELECT <or >buttons to increment or decrement through the special call list.

30

Image 30

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers