Ericsson LZT-1872R1A manual Sending a Special Call, Spc Cal

Page 48

SENDING A SPECIAL CALL

1.Press the 5key to put the radio into Special Call mode which also provides access to a pre- programmed special call list. Each selection from the list is programmed with either an individual number or an interconnect number. If programmed, the special call list is capable of displaying an alpha-

numeric field. The PHONE and flags will also be illuminated while in the Special Call mode. If no Special Calls are programmed, the radio displays

SPC CAL.

2.Press the SELECT <or >buttons to increment or decrement through the special call list.

NOTE

To display the last seven digits of the individual or interconnect number currently selected, press and hold the SHFT/CLR/MONITOR button and then press the Skey.

3.Individual Call - Once the desired individual special call number is displayed, press and release the PTT to initiate the call. The radio displays WAIT and performs the necessary signaling required to obtain a working channel.

Interconnect Call - Once the desired interconnect special call number is displayed, press and release the PTT to initiate the call. The radio displays WAIT

48

Image 48

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers