Ericsson LZT-1872R1A manual

Page 17

Conventional - Pressing and holding the Shift/Clear/Monitor button twice

(double click) will enable MONITORING the channel for activity by unsquelching the receiver. All transmissions will be heard, even if Channel Guard protected.

Backlight	The side,	uppermost	mounted
	momentary	switch when	pressed
	illuminates the LCD for a pre-
	programmed time perod.

System/Group Select Switch

<

>

The Select buttons <and > switches are used to increment or decrement the current Group/ Channel selection. Pressing the Shift>button and then the <and

buttons will increment or decrement the System selection. The Select buttons are also used to increment or decrement the Special Call selection while in the Special Call mode.

HThe HOME/Emergency key is used to automatically select a desired Group and/or System by pressing and holding the key for a programmed duration. The HOME/ Emergency key is also used to declare emergencies by pressing and holding the key for a pre- programmed duration. Emergency messages may only be issued on

17

Image 17

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations FCC Licensing Transceiver ServicePage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute SYS and GRP/CHANNEL Indicators IndicatorsBusy Status IndicatorsStandard Tones Alert TonesTones for Trunked Operation only Edacs Page Keypad Lock Error MessagesScat Operation Keypad MuteEdacs Operation Receiving a Message Page Sending a Message Squelch AdjustmentSending a Special Call Press and hold the SHIFT/CLR/MONITOR buttonPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial ADD/DELETE Groups Scan Operation ENABLE/DISABLE ScanWide Area and Priority System Scanning Optional Delete GroupsDynamic Regrouping Optional Prosound OptionalEmergency Operation Optional HOME/EMERGENCY KEY DefinitionSending An Emergency Call Home Select GE-MARC Operation Receiving a MessageSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Manually Entered Interconnect Call Scan Operation Enable/Disable ScanScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers