Ericsson LZT-1872R1A manual Scan Operation ENABLE/DISABLE Scan, ADD/DELETE Groups

Page 39

In the same manner, stored interconnect numbers (tones) may be sent by:

1.Recalling the desired storage location as described previously in the Recalling Manually Stored ndividual and Interconnect Numbers section.

2.Pressing the PTT bar to send the tones.

SCAN OPERATION

ENABLE/DISABLE SCAN

ITo enable Group scanning, press and release the key. The SCAN flag will illuminate to indicate scan is active. When scan is on, press and release the I

key to disable scan operation. The SCAN flag will be extinguished when scan in turned off.

ADD/DELETE GROUPS

Groups can be added or deleted from the scan list as necessary. To add Groups to the Scan list:

1.Select the desired Group to be added. If the current group is already included in the scan list, the 8flag will be illuminated.

2.To add the group to the scan list, press the ISH FT/CLR/MONITOR button and then press the key. The 8flag will turn on and the group will

be included.

39

Image 39

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations FCC Licensing Transceiver ServicePage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute SYS and GRP/CHANNEL Indicators IndicatorsBusy Status IndicatorsStandard Tones Alert TonesTones for Trunked Operation only Edacs Page Keypad Lock Error MessagesScat Operation Keypad MuteEdacs Operation Receiving a Message Page Sending a Message Squelch AdjustmentSending a Special Call Press and hold the SHIFT/CLR/MONITOR buttonPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial ADD/DELETE Groups Scan Operation ENABLE/DISABLE ScanWide Area and Priority System Scanning Optional Delete GroupsDynamic Regrouping Optional Prosound OptionalEmergency Operation Optional HOME/EMERGENCY KEY DefinitionSending An Emergency Call Home Select GE-MARC Operation Receiving a MessageSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Manually Entered Interconnect Call Scan Operation Enable/Disable ScanScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers