Ericsson LZT-1872R1A manual

Page 28

To answer call, simply press PTT and begin talking if caller’s ID is still in display. If caller’s ID is no longer in display, the CALL indicator will be illuminated, indicating the radio received an Individual call. Press the 5key to display caller’s ID, then press PTT and begin talking.

GROUP CALL - When the radio receives a group call, it unsquelches on the assigned channel and lights the BUSY flag. If programmed on, the group call received tone (single tone) will sound. The radio can also be programmed to display the Group name originators ID.

INTERCONNECT CALL - If an interconnect call (telephone call directed to your radio) is received, the radio unsquelches on the assigned channel. The radio displays PHN CAL and the CALL and BUSY flags turn on. If programmed on, the interconnect call received tones (one high followed by one low) will sound. The PHONE and status flags will be displayed.

NOTE

The optional call received tones are programmed off by default.

5.Using the VOLUME knob, adjust the volume as necessary.

28

Image 28

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers