Ericsson LZT-1872R1A manual HOME/EMERGENCY KEY Definition, Emergency Operation Optional

Page 42

NOTE

The regroup is identified by the leading zero in the 6th digit of the Display field. This zero is normally suppressed in Group 1-8.

HOME/EMERGENCY KEY DEFINITION

The 0key can be programmed in one of the following configurations:

1.Emergency Enabled and Home Enabled - The radio will switch to the programmed home System and/or Group, and send an emergency transmission.

2.Emergency Enabled and Home Disabled - The radio will send an emergency transmission on the Current System/Group.

3.Emergency Disabled and Home Enabled - The radio will switch to the home System and/or Group.

4.Emergency Disabled and Home Disabled - The key is not active.

EMERGENCY OPERATION (OPTIONAL)

If the radio receives an Emergency Channel Assignment, an alert tone will sound if programmed and EMRGNCY will be displayed.

42

Image 42

Contents Ericssonz Page Table of Contents Table of Contents con’t Conventional Mode Operation Safety Information Battery Charging and Care For Best Performance Extended Operations Transceiver Service FCC LicensingPage This page intentionally left blank Introduction Page Features Quick Reference Guide Controls Page Mute Indicators SYS and GRP/CHANNEL IndicatorsStatus Indicators BusyAlert Tones Standard TonesTones for Trunked Operation only Edacs Page Error Messages Keypad LockKeypad Mute Scat OperationEdacs Operation Receiving a Message Page Squelch Adjustment Sending a MessagePress and hold the SHIFT/CLR/MONITOR button Sending a Special CallPage Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual and Interconnect Numbers Page Seven digits of the telephone number will be displayed Dtmf Overdial Scan Operation ENABLE/DISABLE Scan ADD/DELETE GroupsDelete Groups Wide Area and Priority System Scanning OptionalProsound Optional Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation OptionalSending An Emergency Call Home GE-MARC Operation Receiving a Message SelectSending a Message Page SPC CAL Page Sending a PRE-PROGRAMMED Special Call in Conference Call Sending a Manually Entered Individual Call Page Sending a Manually Entered Interconnect Call Manually from the key pad, press thenumberkey Page Storing Individual and Interconnect Numbers Page Page Page GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Manually Entered Interconnect Call Enable/Disable Scan Scan OperationScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message Sending a Manually Entered Interconnect Call Scan Operation Be removed from the scan list OPERATOR’S Radio Setup System TRK/CNV GRP/CHN Number Name USE Nickel Cadmium Battery Warranty Warranty Emergency Numbers