OfficeServ 7100 Installation Manual
CHAPTER 1. Before Installing
This chapter describes items to check when inspecting the installation site and the grounding and power conditions before installing the OfficeServ 7100 system. This chapter also describes the items included in the OfficeServ 7100 package and the installation procedure.
1.1 Site Information
Select a site that satisfies the following conditions for safety, temperature and humidity:
1.1.1 Safety Conditions
yThe OfficeServ 7100 system should not be installed near materials that can cause a fire, such as explosive gas and inflammables.
yThe OfficeServ 7100 system should not be near equipments that generate electromagnetic waves, such as monitors or copying machines.
yThe installation location should be convenient for distributing trunk lines and extension lines, for connecting power and grounding wires, and for maintenance and repair.
yThe OfficeServ 7100 system should not be installed in aisles or passageways that are populated or used for moving equipment.
yAlways maintain cleanliness to prevent dust from damaging the
yBefore installing the OfficeServ 7100 system, check items such as the electric wiring status, grounding status, voltage and frequency.
1.1.2Temperature and Humidity
yThe conditions for temperature and humidity are as follows:
−Operation Temperature: 0~40°C
−Storage temperature:
−Humidity: 10~90%
yCool area without direct sunlight
yVentilators should be installed to remove dust.
© SAMSUNG Electronics Co., Ltd. |