CHAPTER 3. Ошибка! Стиль не определен.
Following boards are mounted on the slots according to the configuration of the OfficeServ 7100.
Table 3.1 Mountable Boards on Slots
Cabinet | Slot |
| Mountable Board |
Control Part | Slot 0 | MP10, MP11 | |
|
|
|
|
Subscriber | Slot 1 and Slot 2 | - OS 7100 | Card: UNI board |
Part |
| - OS 7200 | Card: 8/16DLI2, 8/16SLI2, 8COMBO, 8TRK, |
(UNI) |
| TEPRI, LIM, MGI, | |
|
| - OS7400 Card: TEPRI2, MGI64 | |
|
|
|
|
The descriptions about each part on the rear of the cabinet are listed in the table below.
| Table 3.2 Parts on the Rear Panel of the Cabinet | |
|
|
|
Part |
| Function |
Power Switch |
| Power on/off the OfficeServ 7100 system. |
|
|
|
Power I/O Switch |
| Connector for the power cable connection |
|
|
|
AC LED |
| The LED indicates the input of AC power. |
|
|
|
DC LED |
| The LED indicates the normal output of DC power. |
|
|
|
Battery Socket |
| Socket to connect an external battery |
|
|
|
Ground Lug |
| Lug for the ground of the system communication |
|
|
|
© SAMSUNG Electronics Co., Ltd. |