OfficeServ 7100 Installation Manual
CHAPTER 6. Connecting C.O. Line
This chapter describes how to connect the C.O. line to the OfficeServ 7100 system after installation.
6.1 Line Conditions
Cautions for connecting C.O. lines are as follows:
yUs the cables with AWG #24 or AWG #26 thickness.
yWhen wiring cables in
yCables should be handled carefully to prevent any distortions or damages.
ySubscriber lines should be kept indoors if at all possible.
yDo not cable subscriber lines around any
Leak resistance for the C.O. line connected to the OfficeServ 7100 system is as follows:.
Table 6.1 Line condition of OfficeServ 7100
Line Condition |
| Leak Resistance |
Leak Resistance between Lines | 20 kΩ | or higher |
Leak Resistance Between Grounds | 20 kΩ | or higher |
|
|
|
© SAMSUNG Electronics Co., Ltd. |