CHAPTER 2. Ошибка! Стиль не определен.
2.3 Installing in a Rack
This section describes how to install the OfficeServ 7100 cabinet inside a
2.3.1 Cautions for Installation
Take the following cautions when installing the OfficeServ 7100 cabinet inside a rack:
yThe 19” rack should be a standard electric equipment rack.
yWhen using an
yFor the
yWhen using an open rack, do not block the entrance of a port or fan of the OfficeServ 7100 system.
2.3.2Tools Required
yA
yTwo brackets and six screws for attaching rack
yTwo clamp screws
Figure 2.1 Tools for the Installation inside a Rack
2.3.3 Installing in a Rack
The procedure for installing the OfficeServ 7100 cabinet inside a
1)Attach the cabinet bracket to the bottom surface of the OfficeServ 7100 cabinet and fasten the bracket firmly with the two screws.
Figure 2.2 Rack Installation (1)
© SAMSUNG Electronics Co., Ltd. |