Samsung 7100 Connecting to a Door Phone and a Door Lock, Connecting to 8DLI/16DLI2/4DLM Boards

OfficeServ 7100 Installation Manual

7.1.4.1 Connecting Boards to Ethernet

LIM/MGI/MGI64/MP10/MP11/4SWM board can be connected to Ethernet by using an Ethernet cable

RJ-45 Port

yLIM Board-All ports(P1~P16)

y4SWM Board-Line Ports(P1~P4)

yMP10/11, MGI16/MGI64 Board-LAN Port

Pin No.	1	2	3	4	5	6	7	8
Function	Tx+	Tx-	Rx+	-	-	Rx-	-	-

Figure 7.8 RJ-45 Port of Ethernet Connection Board

7.1.5 Connecting to a Door Phone and a Door Lock

Connect a door phone and a door lock to the OfficeServ 7100 system by using a Door Phone Interface Module(DPIM). Connect a pair of #24 AWG or #26 AWG cables to the LINE port of DPIM and the ports of 8DLI/16DLI2/8COMBO/4DLM board of the OfficeServ 7100 system.

Connecting to 8DLI/16DLI2/4DLM Boards

Pin No.	1	2	3	4	5	6	7	8
Function	-	-	-	DLI TIP	DLI	-	-	-
					RING

Figure 7.9 RJ-45 Port of 8DLI/16DLI2/8COMBO/4DLM Boards (for Door Phone)

1)Connect the Door port of DPIM and the line port of DOOR BOX port.

2)When using an automatic door lock, connect the Lock port of the DPIM and the door phone contact point to the door lock.

The door lock contact point is designed to control low-voltage relay and uses 24 VDC and 100 mA.

MMC Related

MMC 211 is used to assign call numbers to door phones.

© SAMSUNG Electronics Co., Ltd. 7-7