Ошибка! Стиль не определен.
WARNING
Caution for Grounding
-Do not connect the grounding wire of the OfficeServ 7100 system to a power conduit of a building
-The standards for power and grounding should comply with the country standard and the pertinent work should be conducted according to the country standard.
-External grounding is required to prevent human injuries or system damages caused by lightning, static electricity, or voltage surge.
-Unplug the AC power cord before connecting the grounding wire. Failure to do so may cause human injury.
-The OfficeServ 7100 system should be connected to an outlet with a protective ground.
-The GND in the back panel of the OfficeServ 7100 system should be grounded.
Use of Double-pole/neutral fusing
If the system is repaired after removing only one fuse used in the neutral line, it may cause electric shock. If the repair is required, repair the system after extracting the plug of the power cord.
Caution for powers when mounting boards
Check if the cabinet power is off when mounting boards on slots. Inserting or ejecting a board while the power is on may damage the board.
Caution for the connection of the ground cable
Unplug the AC power cord before connecting the ground cable. If the connection work is performed when the power cable is connected, it may cause serious bodily damage.
VI | © SAMSUNG Electronics Co., Ltd. |