6.Remove pump mounting screws securing pump (one on each side).
Pump Mounting Screw
Hose
Clamp
7. | Carefully slide pump from brackets |
|
|
| and out of the way. |
| Pump |
8. | Using an adjustable wrench remove |
| shown |
| moved | ||
| the regulator manifold. |
| |
|
| out of the | |
9. | Apply pipe sealant to new regulator |
| way |
| manifold and assemble, tighten with |
|
|
| wrench. |
|
|
10. | Reapply pipe sealant to safety |
|
|
| valve. |
| Regulator |
11. | Reassemble all components in |
| Manifold |
| reverse order of removal. Make sure |
|
|
| to orient gauges to read correctly |
| |
| and use wrenches to tighten all components. |
|
STORAGE
Before you store the air compressor, make sure you do the following:
1.Review the Maintenance section on the preceding pages and perform scheduled maintenance as necessary.
2.Drain water from air tank. See To Drain Tank under Maintenance.
Water will condense in the air tank. If not drained, water will corrode and weaken the air tank causing a risk of air tank rupture.
3.Protect the electrical cord and air hose from damage (such as being stepped on or run over). Wind them loosely around the compressor handle.
4.Store the air compressor in a clean and dry location.
REPLACEMENT PARTS | SERVICE |
|
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our service website at www.deltaportercableservicenet.com. You can also order parts from your nearest
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about
14 - ENG