Kompernass POF1300 manual Router POF Introduction, Proper use, Features and equipment

Introduction

The following icons / symbols are used in this instruction manual:

		Read instruction manual!	Safety class II
		Observe caution and safety notes!	Wear hearing protection, dust protection mask,
			protective glasses and protective gloves.
		Caution – electric shock!	Keep children and other unauthorised personnel
		Dangerous electric current – danger to life!	at a safe distance when using electrical tools.
n0			Keep the device away from rain or moisture.
		Rated idle running speed	Water entering an electrical device increases the
			risk of electric shock.
V			Damaged appliances, power cables and power
	~	Voltage	plugs mean potentially fatal risks from electric
			shock. Regularly check the condition of the appli-
			ance, the power cables and the power plugs.
W		Watts (Effective power)	Dispose packaging and appliance in an
			environmentally-friendly way!

Router POF 1300

QIntroduction

Please make sure you familiarise your- self fully with the way the device works

before you use it for the first time and that you understand how to handle electrical pow- er tools correctly. To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation.

QProper use

The device is intended for routing grooves, edges, profiles and elongated holes and for copy routing whilst resting firmly on wood, plastic and light con- struction materials.

With a reduced rotational speed and the appropri- ate router bits, the device can also be used to ma-

6 GB

chine non-ferrous metals. The device is not intended for use in the open air. The device is not intended for commercial use. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use.

QFeatures and equipment

Figure A, front of device:

1Handle with ON / OFF switch

2Spindle lock button

3Spindle

4Chip shield

5Base plate

6Guide plate

7Step buffer

8Dust boot

9Stop screw for depth stop

10Depth stop

11Slider with index mark

12Scale for coarse adjustment of depth of cut in mm

13Scale for fine adjustment of depth of cut in mm