Bosch Power Tools BNS200-18 manual Troubleshooting, Problem Symptoms Resolution

Page 14

BM 2610957386 04-09:BM BNS200-18 04-09 6/17/09 7:55 AM Page 14

Troubleshooting

PROBLEM

SYMPTOMS

RESOLUTION

Nailer operates, but no

• Check for a jam.

• Clear a jam.

nail is driven.

• Check function of nail follower.

• Clean and lubricate.

 

• Follower springs weakened or damaged?

• Replace follower spring.

 

• Check for proper nails.

• Use only recommended nails.

 

• Verify tool is loaded.

• Reload tool.

 

 

 

Nail driving action seems

• Check air pressure is in operational range.

• Increase air pressure (Do not exceed 120 psi).

slow or weak.

• Driver blade worn?

• Use pneumatic tool lubricant.

 

• Piston O-ring worn or damaged?

• Contact BOSCH for replacement or repair.

 

• Bumper worn?

• Replace Bumper.

 

• Check recommend hose diameter and length.

• Follow recommendations.

 

 

• Check hose for kinks.

 

 

 

Tool drives nails too

• Check air pressure.

• Reduce air pressure. Min. Operational

deep.

• Check Depth of Drive.

pressure 60 psi.

 

• Check bumper wear.

• Use “Depth of Drive Adjustment”.

 

 

• Replace bumper.

 

 

 

Tool drives nails too

• Check air pressure.

• Increase air pressure. Max. Operational

shallow.

• Check Depth of Drive.

pressure 120 psi.

 

• Check recommend hose diameter and length.

• Use “Depth of Drive Adjustment”.

 

 

• Follow recommendations.

 

 

• Check hose for kinks.

 

 

 

Tool skips nails or has

• Check for proper nails.

• Use only recommended nails.

intermittent feed.

• Check function of magazine per page 7.

• Clean and lubricate.

 

• Follower spring weakened or damaged?

• Replace follower spring.

 

• Piston O-ring cut or heavily worn?

• Contact BOSCH for replacement.

 

 

 

Nails jam frequently.

• Check for proper nails.

• Use only recommended.

 

 

 

Driven nails are bent.

• Driver blade worn?

• Contact BOSCH for replacement.

 

 

 

Nails driven properly

• Check inside diameter of air hose.

• Use correct air hose.

during normal operation,

• Check suitability of compressor.

• Use correctly sized compressor for number of

but does not drive fully at

 

tools used and work rate.

faster nailing speeds.

 

 

 

 

 

14.

Image 14
Contents Importante Work Area General Pneumatic Tool Safety RulesPersonal Safety Tool Use and Care Air Source Safety Rules for Pneumatic Nailer ToolsService Can fire when reconnected to air supply Additional Features Functional Description and SpecificationsSpecifications Maximum Capacities Actuation System Assembly / InstallationOperation Least 200 PSILubricant LubricationNail Loading Against Nail tips contact Nose Wear railTo connect the air supply Connecting Air SupplyCold Weather Operation Firing Modes Sequential Firing ModeBump Firing Mode Trigger PressTurn the adjustment knob clockwise Depth of Drive AdjustmentTurn the adjustment knob counter clockwise Nail UnloadingJam Clearing Nail IndicatorAdjustable Exhaust Deflector Action WHY HOW MaintenanceCleaning StorageCompressor AccessoriesNo-Mar Pad Troubleshooting Problem Symptoms ResolutionEspace de travail Sécurité personnelleConsignes de sécurité pour les cloueuses pneumatiques Source d’alimentation en airBM 2610957386 04-09BM BNS200-18 04-09 6/17/09 755 AM Autres caractéristiques Description fonctionnelle et spécificationsSpécifications Capacités maximales Système d’actionnement Assemblage / InstallationFonctionnement LubrificationGouttes de lubrifiant pour outils pneumatiques Chargement des clousPoussez la bande de clous contre le bec Pousser contre le becRaccordement de l’alimentation en air Raccordement de l’alimentation en airFonctionnement par temps froid Modes d’éjection Mode d’éjection « séquentielle »Mode d’éjection « par butée » GâchetteCeci empêche le risque d’éjection accidentelle de clous Déchargement des clousRéglage de la profondeur de clouage RasDéflecteur déchappement réglable Retrait des clous coincésIndicateur de chargement des clous Action Pourquoi Comment NettoyageRangement Compresseur AccessoiresPatin antimarques Diagnostic de dépannage Problème Symptômes RésolutionÁrea de trabajo Seguridad personalServicio de ajustes y reparaciones Fuente de aireBM 2610957386 04-09BM BNS200-18 04-09 6/17/09 755 AM Características adicionales Descripción funcional y especificacionesEspecificaciones Capacidades máximas Sistema de accionamiento Ensamblaje / InstalaciónUtilización LubricaciónCarga de los clavos Para conectar el suministro de aire Conexión del suministro de aireUtilización en tiempo frío Llados como fuente de energía. Podría ocurrirModo de disparo por contacto Modos de disparoModo de disparo secuencial Contacto con la pieza de trabajo Descarga de clavosAjuste de la profundidad de clavado Deflector de escape ajustable Despeje de atascosIndicador de clavos Retire el clavo, utilizando alicates si es necesarioAlmacenamiento MantenimientoLimpieza Acción POR QUÉ CómoCompresor AccesoriosAlmohadilla que no raya Contacto con la pieza de trabajoResolución de problemas Problema Síntomas ResoluciónNotas Limited Warranty of Bosch Portable and Benchtop Power Tools