Draytek SM200L instruction manual Maintenance, Service, Accessories, Warranty

Page 26

MAINTENANCE

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

Apply household floor paste wax to the machine table and extension table or other work surface weekly.

PROTECTING CAST IRON FROM RUST

To clean and protect cast iron tables from rust, you will need the following materials: 1 pushblock from a jointer, 1 sheet of medium Scotch-Brite™ Blending Hand Pad, 1 can of WD-40®, 1 can of degreaser, 1 can of TopCote® Aerosol. Apply the WD-40 and polish the table surface with the Scotch-Brite pad using the pushblock as a holddown. Degrease the table, then apply the TopCote® accordingly.

SERVICE

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable · Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable · Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for

the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

WARRANTY

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

26

Image 26
Contents Motorized Bench Saw Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionStay ALERT, Watch What YOU are DOING, General Safety RulesImportant Safety Instructions USE of this Tool can GenerateAdditional Specific Safety Rules Power Connections Grounding InstructionsCarton Contents Functional DescriptionStand for Model TS200LS only FigAssembly Tools Required AssemblyUnpacking and Cleaning Elevating and Supporting Surfaces for a SAW with no StandAssembling Stand SAW to StandAttaching Blade Height Adjusting Handwheel Attaching Blade Guard and Splitter AssemblyOn the screw L Fig Miter Gauge Attaching Miter Gauge HolderAssembling RIP Fence Illustrates the miter gauge D inserted into the holderOperation Locking Switch in the OFF PositionBlade Height Adjustment Starting and Stopping SAWTo Adjust Positive Stop AT 45 Degrees Blade Tilt Adjustment45 Degree Positive Stop Adjustments RIP Fence Operation Adjustments Table Insert AdjustmentMiter Gauge Operation Adjustments Adjusting Blade Parallel to Miter Gauge SlotsChanging the Blade CROSS-CUTTINGNever USE the Fence AS a CUT-OFF Gage When CROSS-CUTTING RippingConstructing a Push Stick Using Auxiliary Wood Facing on RIP FenceAccessory Dado Cutterhead Guard Removed for CLARITY. Always USE the GuardPage Pushstick Constructing a Push StickPower Tool Institute Constructing a FeatherboardTroubleshooting WHAT’S WRONG? What to DO…Accessories MaintenanceService WarrantySierra Motorizada de Banco de 10 pulg Proposición DE California Instrucciones DE Seguridad ImportantesPautas DE SEGURIDAD/DEFINICIONES Normas Generales DE Seguridad Instrucciones Importantes Sobre SeguridadReglas DE Seguridad Adicionales Para Sierra DE Mesa Guarde Estas InstruccionesConexiones a LA Fuente DE Alimentación Instrucciones DE Conexión a TierraCordones DE Extensión Instrucciones DE FuncionamientoContenido DE Carton Sierra Motorizada DE Banco PartesSoporte Para EL Modelo TS200LS Fig Herramientas DE Ensamblaje Requeridas EnsamblajeDesempaquetado Y Limpieza Ensamblado DEL Volante DE Inclinacion Y Elevado DE Hoja Montaje DE LA Base DE Soporte SM200LSierra QUE Ensambla Ensamblado DEL Ensamblaje DE Protector DE Hoya Y Hendidor Aviso No apriete los tornillos C del todo en este momentoEscuadra DE Ingletes Ensamblado DEL Portador DE LA Escuadra DE Ingletes Desconcte LA Maquina DE LA Fuente DE AlimentacionArrancando Y Deteniendo LA Sierra OperaciónEnsamblado DE LA Guia DE Corte a LO Largo Control DE Elevacion Y Bajado DE LA Hoja Fijando EL Interruptor EN LA Posicion DE ApagadoProteccion Contra Sobrecargas Control DE Inclinacion DE LA HojaAjustando LOS Topes Positivos DE 90 Y 45 Grados Funcionamiento Y Ajustes DE LA Guia DE Corte a LO LargoAjuste DEL Separador DE Millares DEL Vector Funcionamiento Y Ajustes DE LA Escuadra DE IngletesUtilizar LA Maquina Cambio DE LA HojaRealización DE Cortes Transversales Realización DE Cortes AL HiloConstrucción DE UN Palo DE Empujar El protectorFresa DE Ranurar Accesoria Construcción DE UNA Tabla DE Canto Biselado Guia Localizacion DE Fallas Quel EST LE Problème ? QUE FAIRE…Vara DE Empuje Construcción DE UN Palo DE EmpujarAccesorios MantenimientoServicio GarantiaScie détabli motorisée de 10 po 25,4 cm Directives DE Sécurité Importantes Conserver CES DirectivesLignes Directrices EN Matière DE Sécurité Définitions Proposition 65 DE LA CalifornieRègles Générales DE Sécurité Directives DE Sécurité Importantes13. Éviter LES Opérations Maladroites Règles DE Sécurité Spécifiques SupplémentairesPour Éviter L’EFFET DE Rebond Soutenir Correctement LES Pièces Longues OU LargesConnexions Électriques Directives DE Mise À LA TerreRallonges Électriques Description FonctionnelleContenu DU Carton AVANT-PROPOSPièces Outils Nécessaires Pour L’ASSEMBLAGE AssemblageDésemballage ET Nettoyage Surfaces DE Levage ET DE Support Pour UNE Scie Sans SocleAssemblage DU Socle Assemblage DE LA Scie SUR SocleFixation DU Volant Servant À Régler LA Hauteur DE LA Lame Fixation DE Lensemble PARE-MAIN /COUTEAU SéparateurPage Jauge À Onglet Fixation DU PORTE-JAUGE À OngletAssemblage DU Guide Longitudinal Verrouiller L’INTERRUPTEUR EN Position D’ARRÊT FonctionnementDémarrage ET Arrêt DE LA Scie Protection Contre LES SurchargesRéglage Dune Butée Fixe À 45 Degrés Réglage DE L’INCLINAISON DE LA LameRéglages DES Butées Fixes À 90 ET 45 Degrés Utilisation ET Réglages DU Guide Longitudinal Réglage DE Linsert DE TableUtilisation ET Réglages DE LA Jauge À Onglet Changement DE LA Lame TronçonnageSciage EN Long EN Bois Auxiliaire Face AU Guide Fraise Accessoire À RainurerDUN Poussoir » Page « Fabrication DUN Poussoir » Power Tool Institute Sumner Avenue Construction Dune Planche EN ÉventailDépannage Réparation AccessoiresEntretien GarantiePORTER-CABLE · Delta Service Centers