RotoZip RZ2000 manual Installing X-WHEEL and Zip, Abrasive Wheels

RZ 2610001563 07-09:RZ 2610001563 07-09 7/24/09 10:13 AM Page 16

INSTALLING X-WHEEL and Zip®

ABRASIVE WHEELS

1.Depress the cover release button and remove the X-SHIELD cover.

2.Install abrasive wheel onto output shaft.

3.Thread arbor nut provided onto output shaft finger tight, depress shaft lock and tighten wheel with the wrench provided (Fig. 2).

4.Attach X-SHIELD cover. Make sure X- SHIELD cover is properly snapped onto the X-SHIELD guard.

5.Keep guard covering between wheel and user.

6.Make sure the wheel guard lock lever is in the closed position and the XSHIELD guard is securely mounted to the Zipmate attachment. Use the allen wrench to adjust the wheel guard adjustment screw.

7.Adjust the foot of the X-SHIELD abrasive cut off attachment to the desired depth of cut by loosening and tightening the wing knob.

8.Maximum cutting depth is 3/4".

	OUTPUT
ZIPMATE™	SHAFT	X-SHIELD
ATACHMENT	ABRASIVE	COVER
FIG. 4	WHEEL
		ARBOR
		NUT

COLLAR

WHEEL

GUARD

LOCK

LEVERCOVER

RELEASE

BUTTON

X-SHIELD™

GUARD

-16-