Graco 3A1705J Power Up Screen, Menu Bar, Soft Keys, Navigation within Screens

Page 21

ADM Display Details

Power Up Screen

The following screen appears when the ADM is powered up. It remains on while the ADM runs through initialization and establishes communication with other modules in the system.

Menu Bar

The menu bar appears at the top of each screen. (The following image is only an example.)

Date and Time

The date and time are always displayed in one of the following formats. The time is always displayed as a 24-hour clock.

•DD/MM/YY HH:MM

•YY/MM/DD HH:MM

•MM/DD/YY HH:MM

Arrows

The left and right arrows indicate screen navigation.

Screen Menu

The screen menu indicates the currently active screen, which is highlighted. It also indicates the associated screens that are available by scrolling left and right.

System Mode

The current system mode is displayed at the lower left of the menu bar.

Component Identiﬁcation

Alarm/Deviation

The current system error is displayed in the middle of the menu bar. There are four possibilities:

Icon			Function
No Icon			No information or no error has occurred
			Advisory
			Advisory

			Deviation
			Deviation

			Alarm
			Alarm

Status

The current system status is displayed at the lower right of the menu bar.

Soft Keys

Icons next to the soft keys indicate which mode or action is associated with each soft key. Soft keys that do not have an icon next to them are not active in the current screen.

NOTICE

To prevent damage to the soft key buttons, do not press buttons with sharp objects such as pens, plastic cards, or ﬁngernails.

Jump In/Jump Out

In screens that have editable ﬁelds, press to access the ﬁelds and make changes. When changes are

complete press again to exit edit mode.

Navigation within Screens

Press to open drop-down menus on Setup screens.

Press to enter changes or make a selection.

Press to navigate to new screens and to

navigate left and right within a screen. Press to select digits to change within a ﬁeld.

Press to navigate to new screens and to navigate

up and down within a screen. Also press to move between ﬁelds within a drop-down menu, and to increment or decrement numbers within a ﬁeld.

3A1705J

21

Image 21

Contents Instructions Important Safety InstructionsContents Electric Shock Hazard Skin Injection Hazard Pressurized Aluminum Hazard Battery Hazard Isocyanate Conditions Important Two-Component Material InformationMaterial Self-Ignition Moisture Sensitivity of IsocyanatesChanging Materials Foam Resins with 245 fa Blowing AgentsProportioner Models 30i SeriesXP2i Series Approvals SystemsSystems with Air Compressor AccessoriesRelated Manuals Supplied ManualsTypical Installation, with circulation Typical Installation, without circulation Component Identiﬁcation GG Generator,Proportioner Control Panel, MM Motor Control Module MCM, High Power Temperature Control ModuleGenerator Air Compressor Proportioner Control PanelAdvanced Display Module ADM, Engine Control Module,Call Button Function Out Advanced Display Module ADMRed Random Flashing or Solid Module error exists System Status Indicator B ConditionsUSB Module Status LEDs CL Conditions Module Status LEDs CN ConditionsMenu Bar Power Up ScreenSoft Keys Navigation within ScreensIcons See Errors, page 51 for moreIcons Function Softkeys Icon FunctionMotor Control Module MCM MCM Rotary Switch PositionsIcon Description Function Engine Control ModuleLoad Center Related ComponentColor Temperature Control Modules Low Power Module Lptcm Cable ConnectionsAdvanced Display Module ADM, page 19, CN for conditions Hptcm a and B Rotary Switch Settings Adjust Rotary SwitchSetting Zone Lptcm a and B Rotary Switch SettingsSize Component Circuit BreakersMCM See Circuit Breaker Conﬁguration Options,Disable LPTCMs For Booster Heat Auxiliary Wiring Diagram OptionsCircuit Breaker Conﬁguration Options Size Component CB10 90 a 120/240V AlternatorOverview Overview HE VB HE VA Setup Trailer Setup Guidelines, page 35 for instructionsLocate Reactor Setup Trailer Setup Guidelines Install Wall optional Top View With Wall Side View With Wall Connect Battery Add FuelGeneral Equipment Guidelines Electrical Connections Connect Feed PumpsBreathing Air Install Fluid Temperature Sensor Connect Pressure Relief LinesConnect Heated Hose Pressure Check Hose Connect Whip Hose to Gun Or Gun Fluid ManifoldConnect Remote Display Module GroundingSupply Wet Cups With Throat Seal Liquid TSL Advanced Screen 3- USB, Advanced Display Module ADM OperationSet Password Setup ModeSetup Screens Navigation Diagram Figure Advanced Screen 1 General Advanced Setup ScreensAdvanced Screen 3 USB Advanced Screen 2 UnitsSystem Enable or Disable RecipesRecipes Add RecipeRun Mode Run Screens Navigation Diagram Home System Off Home System With ErrorHome System Active TargetsErrors MaintenanceCycles EventsDiagnostic Recipes TroubleshootingSystem Events Startup Check coolant color Open the main air shutoff valveLoad ﬂuid with feed pumps Setup ADM. Advanced Display Module ADM Operation, Temporary Manual Hose Temperature Control Fluid Circulation Circulation Through ReactorFollow Startup, Jog Mode Circulation Through Gun ManifoldGun Manual Fusion AP gun is shown SprayingSpray Adjustments Shutdown Pressure Relief Procedure,Pressure Relief Procedure Flushing FlushingProportioner Maintenance MaintenanceEvery 500 Service Hours or 1 Year Engine MaintenanceFuel Tank Flush Inlet Strainer ScreenPump Lubrication System Follow Pressure Relief Procedure,Perform Shutdown, Drain CoolantReﬁll Proportioner Coolant Loop, LED Component LED ColorReﬁll Proportioner Coolant Loop Maintenance Coolant Speciﬁcations Reﬁll Engine Coolant LoopErrors View ErrorsTroubleshoot Errors Error Codes and Troubleshooting TroubleshootingError Type Name Cause Solution Code Location A1NM MCM AlarmA4CH A4CM MCM AlarmA4DA A4DBA7CH A4NM MCM AlarmA7DA A7DBCacb CacaCach Cacm MCMDE0X MCM Alarm Dadx MCM AlarmF9DX MCM Alarm K8NM MCM AlarmP6AX MCM Alarm P4AX MCM AlarmMBN0 MCM Advi SoryError Type Name Cause Solution Code Position T2AE DeviationT2BE T2DB T2DAT2DH T2DET4CA T4CM MCM AlarmT4CB T4CHT4DH T4NM MCM AlarmT6BE T6AET6DA T6DBT8AE V4CM MCM Alarm V1CM MCM AlarmWbnm MCM Alarm T8DAMCM Alarm Wmce MCM AlarmWscx ADM Advisory Wsux USB AdvisoryUSB Data Follow Download Procedure, page 91, to retrieve log ﬁlesUSB Logs Event LogDaily Log System Conﬁguration SettingsSystem Software Log Blackbox Log FileCustom Language File Download ProcedureCreate Custom Language Strings Upload ProcedureInformation Screens Appendix a Engine Control Module Run ScreensRun Screen Layout Information Screen LayoutMode Icons Instrumentation IconsIcon Description Details Shutdown AlarmsDimensions Dimensions Pallet Mounting Dimensions Proportioners For Foam Performance ChartsProportioners For Coatings PressureFusion Mechanical Purge, Round Pattern Fusion Air Purge, Flat PatternFusion Mechanical Purge, Flat Pattern 30i Models Technical SpeciﬁcationsRecommended Air Compressors WeightNoise Fluid InletsXP2i Models 3A1705J 105 Graco Standard Warranty Graco InformationFor Graco Canada Customers