DM 2610000602 05-08 5/19/08 9:35 AM Page 10
Inserting batteries
1.Remove the battery pack from the tool by squeez- ing the two tabs on the battery pack together and slide the battery pack out of the tool.
BATTERY
PACK
RELEASE
TAB
2.Remove battery pack cover from the battery holder by squeezing the two tabs and remove the battery cover from the battery holder.
4.Align arrow in battery pack cover with arrow in the battery holder and press together. The two parts will only fit together when the arrows are aligned. The two parts will join together with a click.
BATTERY
PACK
COVER
ALIGN
ARROWS
BATTERY
HOLDER
BATTERY PACK COVER 
BATTERY
HOLDER
BATTERY
PACK 
COVER 
RELEASE
TABS
5.Insert the battery pack into the tool by aligning the guide ribs on the battery with the guide track on the tool. The two parts will only fit together when the two arrows align. The two parts will join together with a click.
GUIDE TRACK
3.Paying special attention to the orientation of the batteries, insert four AA batteries into the battery pack cover. Note diagram on the battery holder showing correct battery direction.
! WARNING | RISK OF FIRE USE ONLY 1.5V | |
ALKALINE BATTERIES ONLY. | ||
|
!Do not install backwards, WARNING charge or put in fire. Batteries
may explode or leak.
10