Ryobi P206 manual Adjustable Torque Clutch, Adjusting Torque, Screwdriver BIT

OPERATION

TWO-SPEED GEAR TRAIN

See Figure 5.

The drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of the drill to select either LO (1) or HI (2) speed. When using drill in the LO (1) speed range, speed will decrease and unit will have more power and torque. When using drill in the HI (2) speed range, speed will increase and unit will have less power and torque. Use LO (1) speed for high power and torque applications and HI (2) speed for fast drilling or driving applications.

ADJUSTABLE TORQUE CLUTCH

This product is equipped with an adjustable torque clutch for driving different types of screws into different ma- terials. The proper setting depends on the type of material and the size of screw you are using.

ADJUSTING TORQUE

See Figure 6.

There are twenty-four torque indicator settings located on the front of the drill.

Rotate adjustment ring to the desired setting.

•  1 - 4 For driving small screws

•  5 - 8 For driving screws into soft material

•  9 - 12 For driving screws into soft and hard materials

•  13 - 16 For driving screws in hard wood •  17 - 20 For driving large screws

•  21 - For heavy drilling

BIT STORAGE

See Figure 7.

When not in use, bits provided with the drill can be placed in the storage area located on the top of motor housing.

TWO-SPEED			LO
GEAR TRAIN (HI-LO)
			SPEED
		1
2
HI
SPEED	24
		0
		2
		5
			Fig. 5
TO DECREASE		TORQUE
TORQUE
		ADJUSTMENT RING
		24
		0
		2
		5
TO INCREASE
TORQUE			Fig. 6
SCREWDRIVER BIT		BIT
		STORAGE AREA

24

0 2

5

SCREWDRIVER BIT

Fig. 7

11