Ryobi P206 manual Assembly

Page 8

FEATURES

KNOW YOUR DRILL-DRIVER

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

BIT STORAGE

Bits provided with the drill can be placed in the storage area, located on the top of motor housing.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.

KEYLESS CHUCK

The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.

LEVELS

Levels are located on the top and end of the motor housing to help keep the drill bit level during use.

MAG TRAY™

The magnetic tray conveniently stores screws or other small parts.

TORQUE ADJUSTMENT RING

Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application.

TWO-SPEED GEAR TRAIN

The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill for selecting either LO (1) or HI (2) speed.

VARIABLE SPEED

The switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-525-2579 for assistance.

PACKING LIST

Drill

Double-ended Bits (2)

Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.

8

Image 8
Contents OPERATOR’S Manual Save this Manual for Future ReferenceWarranty IntroductionGeneral Safety Rules Electrical SafetyPersonal Safety Work AreaSpecific Safety Rules ServiceSymbols Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Features Product SpecificationsAssembly To Install Battery Pack To Remove Battery PackBattery Pack Latches OperationSwitch Trigger Forward SwitchTrigger Unlock Release Chuck Collar Lock Tighten Chuck BodyScrewdriver BIT Adjustable Torque ClutchAdjusting Torque See Installing BitsRemoving Bits Drilling TOP View LevelMaintenance General MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesChuck Removal To Retighten a Loose ChuckSee Figures 13 HEX KEY Mallet Keyless ChuckParts and Service Manuel D’UTILISATION Conserver CE Manuel Pour Future RéférenceGarantie Table DES MatièresRègles DE Sécurité Générales Règles DE Sécurité Particulières DépannageSymboles Symbole NOM Désignation / ExplicationSymbole Signal Signification AvertissementCaractéristiques SpécificationsAssemblage Installation DU Bloc DE BATTERIES  UtilisationRetrait DU Bloc DE BATTERIES  Bloc DE Batteries LoquetsGâchette GâchetteUnlock Libération Collier DU Mandrin Lock Blocage Corps DU MandrinEmbrayage DE Couple Réglable Réglage DU CoupleVoir les figures 9 et Installation DES EmboutsRetrait DES Embouts VUE DE Dessus Niveau PerçageVoir les figures 11 et Retrait ET Préparation DU Batteries Pour LE Recyclage EntretienEntretien Général Retrait DU Mandrin Serrage D’UN Mandrin DesserréVoir les figures 13 à Mors DU Mandrin CLÉ Hexagonale Maillet Sans CLÉPièces ET Service Manual DEL Operador Garantía Índice DE ContenidoIntroducción Reglas DE Seguridad Generales ¡ADVERTENCIASeguridad Eléctrica Seguridad PersonalReglas DE Seguridad Específicas ServicioSímbolos Símbolo Nombre DENOMINACIÓN/EXPLICACIÓNAdvertencia Símbolo Señal SignificadoEngranaje DE DOS Velocidades ALTA-BAJA CaracterísticasEspecificaciones DEL Producto Armado Funcionamiento AplicacionesPara Instalar EL Paquete DE Pilas PrecauciónGatillo DEL Interruptor Gatillo DEL Interruptor DE VELOCI- DAD VariableMarcha Adelante / Atrás / Seguro EN EL Centro Lock Apretar Cuerpo DEL Porta BrocasAjuste DE LA Fuerza DE Torsión Embrague DE Fuerza DE Torsión AjustableLugar Para Guardar Puntas Vea las figuras 9 y Instalación DE LAS Puntas DE DestornilladorRemoción DE LAS Brocas Vista Superior Nivel Vista Desde EL Extremo TaladradoVea las figuras 11 y Baterías MantenimientoMantenimiento General Desmontaje DEL Portabrocas Para Apretar EL Portabrocas Cuan Do SE AflojeVea las figuras 13 a Mordazas DEL Portabrocas Llave Hexagonal Mazo GomaPiezas DE Repuesto Y Servicio ONE World TECHNOLOGIES, INC
Related manuals
Manual 18 pages 40.31 Kb