Delta 22-590 instruction manual Assembly, HOW to Prepare for Dust Management

ASSEMBLY

To reduce the risk of injury, turn unit off and disconnect it from power source before installing and removing accessories, before adjusting or when making repairs. An accidental start-up can cause injury.

ASSEMBLY TOOLS REQUIRED	ASSEMBLY TIME ESTIMATE
Cutterhead Wrench (Supplied)	Approximately 1/2 hour

HOW TO PREPARE FOR DUST MANAGEMENT

You have two options for dust management. The first is the dust deflector and the second is the dust collection attach- ment to attach your machine to a dust collector.

HOW TO INSTALL THE DUST COLLECTION ATTACHMENT

Disconnect the machine from the power source.

1.Remove the two screws (A) Fig. 1C that secure the dust deflector.

2.Remove the dust deflector (B) Fig. 2.

3.Place the dust collection attachment (C) Fig. 3 in the slots provided.

4.Attach the dust collection attachment with the four M6 star socket head screws (D) Fig. 4. Two of these screws were removed in STEP 1. Tighten all fasteners securely.

5.Reverse the procedure for installing the dust deflector. Install the dust deflector with the label up and curved lip pointing down.

When using the dust collection attachment, do not operate the unit without a hose connected and a dust collector in operation.

A

Fig. 1C

B

Fig. 2

D

C

Fig. 3

Fig. 4

7