eye shields
Your grinder is supplied with two shields to protect your eyes.
Always wear eye protection.
To attach the eye shields:
1.Place the eye shield (A) Fig. 4 on the spark guard.
2.Align the holes in the eye shield with the holes in the spark guard. Place the eye shield spacer (A) Fig. 5 in the space in the spark guard.
A 
Fig. 4
A
Fig. 5
3.Insert the eye shield bolt (A) Fig. 6 through the hole in the eye shield (B), the eye shield spacer (C), and the spark guard (D).
4.Place a 1/4" flat washer (E) Fig. 6 on the end of the eye shield bolt. Attach the eye shield knob (F) to the end of the eye shield bolt.
5.Install the other eye shield in the same manner.
A 
B
Fig. 6
C
D
E
F
fastening THE grinder A supporting surface
If the grinder has a tendency to tip over, slide, or walk, secure it to the supporting surface, using fasteners (not supplied) through the two holes (A) Fig. 7 in the grinder base.
A
Fig. 7
9