Delta GR450 instruction manual Table of Contents, Important Safety Instructions

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS	2	TROUBLESHOOTING	14
safety guidelines - definitions	2	MAINTENANCE	14
GENERAL SAFETY RULES	3	ACCESSORIES	14
ADDITIONAL SPECIFIC SAFETY RULES	4	SERVICE	14
FUNCTIONAL DESCRIPTION	6	WARRANTY	15
CARTON CONTENTS	7	FranÇais	16
assembly	8	ESPAÑOL	30
operation	10

IMPORTANT SAFETY INSTRUCTIONS

Read and understand all warnings and operating instructions before using any tool

or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which

tools and equipment are designed. Delta Machinery strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed.

If you have any questions relative to its application DO NOT use the product until you have written Delta Machinery and we have advised you. Contact us online at www.deltaportercable.com or by mail at Technical Service Manager, Delta Machinery, 4825 Highway 45 North, Jackson, TN 38305. In Canada,125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)

Information regarding the safe and proper operation of this tool is available from the following sources:

•Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.org

•National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201

•American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1 Safety Requirements for Woodworking Machines

•U.S. Department of Labor regulations www.osha.gov

SAVE THESE INSTRUCTIONS!

safety guidelines - definitions

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazard­ous­ situation which, if not avoided, may result in minor or moder­ate­ injury.

Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.

CALIFORNIA PROPOSITION 65

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, al­ways wear NIOSH/OSHA approved, properly fitting­ face mask or respi­ra­tor­ when using­ such tools.

2