DeWalt D28115R Lubrication, Accessories Repairs, Three Year Limited Warranty, Year Free Service

Page 17

check and clean the tool before resetting the GFCI. ALWAYS

WEAR SAFETY GLASSES when cleaning or using this tool.

CAUTION: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. Use a clean, dry cloth only.

Lubrication

DEWALT tools are properly lubricated at the factory and are ready for use.

Accessories

WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product.

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustments should be performed by a DEWALT factory service center, a DEWALT authorized service center or other qualified service personnel. Always use identical replacement parts.

Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-DEWALT (1-800-433-9258) or visit our website www.dewalt.com.

Three Year Limited Warranty

DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or

damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

1 YEAR FREE SERVICE

DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked.

LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained either in the packaging, call the local company or see website for warranty information.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DEWALT for a free replacement.

DXXXXX

English

16

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Guide D’UTILISATION Manual DE Instrucciones Work Area General Safety Rules For All ToolsElectrical Safety Personal Safety Additional Specific Safety Instructions for GrindersService Tool USE and CareAlways Wear EYE Protection When Using this Tool Causes and Operator Prevention of Kickback Intended USE Components FigAccessories Assembly and AdjustmentsRotating the Gear Case Mounting Guard2 and 5 Grinding Wheels Sanding Discs Wire Wheels2 and 5 Cutting Wheels Operation 2 and 5 Sanding Flap DiscsSpindle Lockc Trigger SwitchGuards and Flanges Mounting NON-HUBBED Wheels Mounting and Removing Hubbed WheelsMounting Sanding Backing Pads Surface Grinding with Grinding WheelsSurface Finishing with Sanding Flap Discs Mounting Wire Brushes and Wire Wheels Mounting and Using Wire Brushes and Wire WheelsUsing Sanding Backing Pads Mounting Closed Type 1 Guard Mounting and Using Cutting Type 1 WheelsUsing Wire CUP Brushes and Wire Wheels Cleaning MaintenanceUsing Cutting Wheels Mounting Cutting WheelsThree Year Limited Warranty Accessories RepairsYear Free Service DAY Money Back GuaranteeConserver CES Directives Règles générales de sécurité pour tous les outilsEspace DE Travail Sécurité EN Matière D’ÉLECTRICITÉUtilisation ET Entretien DE L’OUTIL Sécurité PersonnelleRéparation Causes de l’effet de rebond et prévention par l’opérateur NIOSH/OSHA/MSHA Composants Fig Assemblage ET Réglages AccessoiresRotation du carter d’engrenage Assemblage du capot protecteurRemarque FonctionnementCapot protecteur pour Meule de type Brosses métallique à touret Disques abrasifs Détente Assemblage ET Retrait DES Meules À Moyeu Intégré Bouton DE VerrouillageDispositif DE Verrouillage DE LA Broche Meulage DE Surface Avec DES Meules Abrasives Assemblage DE Meules Sans MoyeuFinition DE Surface Avec DES Disques DE Ponçage À Lamelles Meulage DE Chant Avec DES Meules AbrasivesUtilisation DES Tampons Pour LE Ponçage Assemblage DES Tampons Pour LE PonçageAssemblage et utilisation de disques de coupe type Assemblage DE Disques DE Coupe Assemblage DU Capot Protecteur Fermé TypeNettoyage EntretienGraissage Utilisation DE Disques DE CoupeRéparations Service D’ENTRETIEN Gratuit DE 1 ANGarantie limitée trois ans Garantie DE Remboursement DE 90 JoursConserve Estas Instrucciones Normas generales de seguridad para todas las herramientasÁrea DE Trabajo Seguridad EléctricaUSO Y Cuidado DE LA Herramienta Seguridad PersonalMantenimiento Causas del retroceso y su prevención por parte del operador Utilice Siempre Equipos DE Seguridad Certificados USO Previsto Componentes FigRotación de la caja de engranajes Ensamblado Y AjustesAccesorios Protector de montajeProtectores y bridas FuncionamientoDiscos de esmerilar de 114 mm 4-1/2 y 127 mm De 152 mm Discos de lijar Discos de corte de 114 mmDiscos de alambre Botón DE Bloqueo Discos de lijar de 114 mm 2 y 127 mm Interruptor disparadorMontaje DE Discos SIN Cubo Bloqueo DEL EJEMontaje Y Extracción DE Discos CON Cubo Esmerilado DE Superficie CON Discos DE Esmerilar Esmerilado DE Bordes CON Discos DE EsmerilarMontaje DE LAS Almohadillas DE Respaldo Para Lijar Acabado DE Superficies CON Discos DE LijarMontaje DE Cepillos DE Alambre Y Discos DE Alambre Montaje y uso de cepillos de alambre y discos de alambreUSO DE Almohadillas DE Respaldo Para Lijar Montaje DEL Protector Cerrado Tipo Montaje y uso de discos de corte TipoUSO DE Ruedas DE Corte Montaje DE LOS Discos DE CorteLimpieza MantenimientoLubricación ReparacionesGarantía limitada de tres años Póliza de GarantíaExcepciones Servicio Gratuito DE 1 AÑOEspecificaciones D28065, D28065N, D28115, D28115N Garantía DE Reembolso DE Dinero DE 90 DíasPage Page
Top Page Image Contents