Black & Decker CS1014 Possible Cause Possible Solution, Unit will not start Cord not plugged

for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black+Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. This warranty does not apply to accessories. This warranty gives

you specific legal rights and you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest Black+Decker Service Center. This product is not intended for commercial use.

Free Warning Label Replacement: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

Problem	Troubleshooting
	Possible Cause	Possible Solution
• Unit will not start.	• Cord not plugged in.	• Plug tool into a working outlet.
	• Circuit fuse is blown.	• Replace circuit fuse. (If the
		product repeatedly causes the
		circuit fuse to blow, discontinue
		use immediately and have it
		serviced at a Black+Decker
		service center or authorized
	• Circuit breaker is tripped.	servicer.)
		• Reset circuit breaker. (If the
		product repeatedly causes the
		circuit breaker to trip,
		discontinue use immediately
		and have it serviced at a
		Black+Decker service center
	• Cord or switch is damaged.	or authorized servicer.)
		• Have cord or switch replaced
		at Black+Decker Service
		Center or Authorized Servicer

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the Black+Decker help line at

1-800-544-6986.

Imported by

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.

10