Bushnell 20-5102, 20-5103 manual Unit of Measure Options, Active Laser, Selective Targeting Modes

Page 5

UNIT OF MEASURE OPTIONS

The PINSEEKER®1500 can be used to measure distances in yards or meters. The unit of measure indicators are located in the lower right portion of the LCD. To select between yards and meters, quickly press and release the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the “MODE” button (left side of the eyepiece) and hold it down for approximately 5 seconds. If you are changing from yards to meters, a change in unit of measure will be indicated by the illumination of the M for meter indicator while the Y for Yard indicator is turned off. If you are changing from meters to yards, the opposite will occur. The PINSEEKER® 1500 will return to the last unit of measure setting used each time the unit is turned on.

ACTIVE LASER

Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button. The crosshairs surrounding the circle will disappear once the power button has been released (i.e. the laser is no longer being transmitted).

SELECTIVE TARGETING™ MODES

The PINSEEKER®1500 was especially designed with golfers in mind. The selective targeting modes allow you to adjust the performance parameters of the unit to suit your specific situation and environment. To move from one mode to another, press the POWER button once to turn on the unit. While looking through the eyepiece, press the MODE button and quickly release. The different targeting modes available and mode indicators are listed below:

PinSeeker (LCD Indicator - ) Ever have trouble getting distance to the flag? This advanced mode allows easy acquisition of the flag without inadvertently getting distances to background targets (i.e. trees) that have stronger signal strength.

Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle reticle onto the flag that you want distance to. Next, press and hold the POWER button and move the laser slowly over the flag or desired object until a circle surrounds the flag indicator. If the laser beam recognized more than one object (i.e. flag and background trees), distance of the flag will be displayed and a circle will surround the PinSeeker indicator informing the user that distance to the flag (i.e. closer object) is being displayed in the LCD (as seen below). There may be times when only the laser beam only sees one object in its path. In this case, the distance will be displayed, but because more than one object was not acquired, a circle will not surround the flag indicator.

TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that you are only displaying the closest of the objects recognized by the laser.

Once the device has shut off, the unit will always default back to the PinSeeker mode.

6

7

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model 20-5102/20-5103 LIT. # 98-0524/01-05 Contents Introduction Distance to the Flag every timeHOW OUR Digital Technology Works Ranging AccuracyAdjusting the Eyepiece Inserting the BatteryLiquid Crystal Display LCD Indicators Operational SummarySelective Targeting Modes Unit of Measure OptionsActive Laser Truth about Slopes How to use Slope +Advantage of Slope+ Cleaning SpecificationsOptical Design Tripod MountTrouble Shooting Table TWO-YEAR Limited WarrantyIf unit does not turn on LCD does not illuminate If target range cannot be obtainedFCC Note Français Alimentation La distance au Drapeau chaque fois100 % étanche à l’eau EN Quoi Consiste Notre Technologie NumériqueMise EN Place DE LA Pile Mode D’EMPLOI EN BrefRéglage DE L’OCULAIRE Indicateurs DE L’AFFICHEUR À Cristaux Liquides LCDModes DE Ciblage Sélectif Selective Targeting Choix D’UNITÉS DE MesureLaser Actif La vérité sur les pentes Comment utiliser Slope +’avantage de Slope+ Grossissement et traitements Conception OptiqueMonture DE Trépied Spécifications’il est impossible d’obtenir la distance Garantie Limitée DE Deux ANSTableau DES Problèmes Rencontrés Page Español Precisión Para Medir Distancias IntroducciónCómo Funciona Nuestra Tecnología Digital Ajuste DEL Ocular Insertar LA PilaResumen DE Funcionamiento Indicadores DE LA Pantalla DE Cristal Líquido LCDLáser Activo Opciones DE LA Unidad DE MedidaLa verdad acerca de las pendientes Cómo usar el Slope +La ventaja del Slope + Aumento y revestimientos Diseño ÓpticoMontura DEL Trípode EspecificacionesTabla DE Localización Y Reparación DE Averías Garantía Limitada DE DOS AñosLa unidad no se enciende la pantalla LCD no se ilumina Si no se puede obtener la distancia al blancoNota DE FCC Deutsch Genauigkeit DER Entfernungsmessung EinleitungSO Arbeitet Unsere Digitaltechnologie Anpassung DES Okulars DEN Akku EinlegenZusammenfassung DER Betriebsweise Anzeiger DER FLÜSSIGKRISTALL-ANZEIGE LCDSelektive Zielverfolgungsmodi MASSEINHEIT-OPTIONENAktiver Laserstrahl Die Wahrheit über Neigungen Benutzung des +/- NeigungTMDer Vorteil des +/- Neigung Stativvorrichtung Optische AuslegungSpezifikationen SäuberungTabelle ZUR Störungsbehebung AUF Zwei Jahre Begrenzte GarantieWenn das Gerät nicht einschaltet Das LCD leuchtet nicht auf Wenn die Zielmessung nicht funktioniertAnmerkung Bezüglich FCC-VORSCHRIFTEN Italiano Precisione DI Puntamento IntroduzioneFunzionamento Della Tecnologia Digitale Inserimento Della Pila Indicatori SUL Display a Cristalli LiquidiRegolazione DELL’OCULARE Modalità D’USOModalità Selective Targeting Indicazione DELL’UNITÀ DI MisuraLaser Attivo La verità sulle pendenze Come usare Slope +Il vantaggio di Slope+ Ingrandimento e trattamento Caratteristiche OtticheSostegno PER Treppiede Dati TecniciGaranzia Limitata DI DUE Anni Guida Alla Soluzione DEI ProblemiSe il telemetro o il display non si accende Se non si riesce a misurare la distanza dal bersaglioAnnotazioni FCC Português Precisão DE Medidas IntroduçãoComo Funciona Nossa Tecnologia Digital Como Ajustar a Ocular Inserção DA PilhaResumo Operacional Indicadores do Display DE Cristal Líquido LCDModos Selective Targeting Modos DE Mira Seletivos Opções DA Unidade DE MedidaLaser Ativo Verdade sobre inclinações Como usar o Slope +Vantagem do Slope+ Ampliação e revestimentos Design ÓpticoMontagem EM Tripé EspecificaçõesGarantia Limitada DE Dois Anos Tabela DE Identificação E Solução DE ProblemasUnidade não liga o LCD não acende Se a leitura da distância do alvo não puder ser obtidaNota DA FCC Bushnell Performance Optics

20-5103, 20-5102 specifications

The Bushnell 20-5102 and Bushnell 20-5103 are part of the renowned optics manufacturer’s line of high-quality binoculars, designed for outdoor enthusiasts, bird watchers, and casual users alike. With their cutting-edge features and robust construction, these models provide exceptional clarity and versatile usability in a variety of settings.

One of the standout features of the Bushnell 20-5102 and 20-5103 is their fully multi-coated optics, which maximize light transmission and ensure that users get the brightest and clearest images possible. This technology minimizes glare and enhances contrast, allowing users to see fine details even in challenging lighting conditions. Whether you're observing birds in a shaded forest or scanning the horizon at sunrise, these binoculars excel in providing an immersive viewing experience.

Both models are equipped with a durable, rubber-armored exterior that not only protects them from bumps and drops but also provides a secure grip in wet or slippery conditions. This rugged design makes them ideal companions for outdoor activities such as hiking, camping, and sporting events. The lightweight yet sturdy construction ensures that they are easy to carry along on any adventure without adding unnecessary bulk.

The Bushnell 20-5102 and 20-5103 also feature a generous eye relief, which is essential for users who wear eyeglasses. This characteristic allows for comfortable viewing without sacrificing the field of view. Furthermore, the generous field of view makes it easier to track moving subjects, which is a significant advantage for bird watchers and wildlife enthusiasts.

Another notable characteristic of these models is their waterproof and fog-proof capability. Both binoculars are nitrogen-purged and O-ring sealed, preventing internal fogging and ensuring reliable performance in wet conditions. This durability means users can confidently use them in a variety of environments, from sunny beaches to rainy forests.

In summary, the Bushnell 20-5102 and 20-5103 binoculars stand out for their superior optical performance, robust design, and user-friendly features. With fully multi-coated optics, lightweight construction, excellent eye relief, and weatherproof capabilities, these models are well-suited for anyone looking to enhance their outdoor experience. Whether for professional use or recreational activities, these binoculars deliver quality performance, making them a valuable tool for any nature enthusiast.
Top Page Image Contents