Honeywell R0512 manual Attributes

EXCEL 50/100/500/600/800				ATTRIBUTES
		Table 18. Datapoint attributes
totalizer input	pseudo totalizer	pseudo analog point	pseudo digital point	pseudo point multistage
	input
User Address	User Address	User Address	User Address	User Address
Descriptor	Descriptor	Descriptor	Descriptor	Descriptor
Technical Address	Suppress Point	Access Level	Access Level	Point Enable
Suppress Point	Access Level	Write Protection	Write Protection	Access
Access Level	Write Protection	Operating Mode	Operating Mode	Write protection
Write Protection	Operating Mode	Value	Value	Operating Mode
Operating Mode	Value	Manual Value	Manual Value	Value
Value	Manual Value	Engineering Unit	Alarm Type	Value Manual
Manual Value	Engineering Unit	Low Warning Limit	Alarm Delay	Status Text
Engineering Unit	Alarm Type	Low Alarm Limit	Alarm Status	Alarm Type
Alarm Type	Trend Logging	High Warning Limit	Point in Alarm	Trend Logging
Trend Logging	Scaling Factor	High Alarm Limit	Alarm Reporting	Hours Run log
Scaling Factor	Interval Limit	Alarm Type	Trend Logging	Hours Run
Interval Limit	Interval Value	Alarm Delay	Hours Run Log	Maintenance Alarm
Interval Value	Suppress Alarm	Point in Alarm	Hours Run	Last Serviced
Suppress Alarm		Trend Logging	Service Interval	Last Change
		Alarm Status changed	Active State	Switch on Counter
		Alarm Hysteresis	Hours Since Serviced	Number of Stages
		Trend Hysteresis	Active State Text	Suppress Alarm
		Trend Cycle	Passive State Text	NV Name and Index *
		Suppress Alarm	Cycle Count
		NV Name and Index *	Last Changed
			Suppress Alarm
			NV Name and Index *
* Read-only attribute. Changing the NV name and index requires changing the datapoint to NV mapping in CARE.

39 EN2B-0092GE51 R0512