Sharp AY-AP12KR GB-8, ONE-HOUR OFF Timer, During operation, press the Plasmacluster button

PLASMACLUSTER OPERATION ONE-HOUR OFF TIMER

Plasmacluster ions released into the room will reduce some airborne mold.

1 During operation, press the PLASMACLUSTER button.

• The remote control will display “ ”.

•The blue PLASMACLUSTER lamp on the unit will light up.

1

TO CANCEL

Press the PLASMACLUSTER button again.

•The PLASMACLUSTER lamp on the unit will turn off.

NOTE:

•Use of the PLASMACLUSTER operation will be memorized, and it will be activated the next time you turn on the air conditioner.

•To turn off the PLASMACLUSTER lamp, press the DISPLAY button.

•To perform Plasmacluster operation in FAN only mode, press the PLASMACLUSTER button when the unit is not operating. The mode symbol of the remote control will go off and the fan speed can not be set AUTO.

When the ONE-HOUR OFF TIMER is set, the unit will automatically turn off after one hour.

1 Press the ONE-HOUR OFF TIMER button.

•The remote control will displays “ ”.

•The orange TIMER lamp ( ) on the unit will light up.

•The unit will stop operating after one hour.

1

CANCEL

TO CANCEL

Press the CANCEL button.

•The orange TIMER lamp ( ) on the unit will turn off.

Alternatively, turn the unit off by pressing the ON/OFF button.

•The red OPERATION lamp ( ) and the orange TIMER lamp ( ) on the unit will turn off.

NOTE:

•The ONE-HOUR OFF TIMER operation has priority over TIMER ON and TIMER OFF operations.

•If the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit starts one-hour operation at the formerly set condition.

•If you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER is activated, press the ONE-HOUR OFF TIMER button again during operation.

GB-8