The AD detail screen displays the following minimum and maximum alarm setpoint ranges that you can configure:
Setpoint displayed | Description |
|
|
HA return temperature | Indicates the temperature reading from the hot |
| aisle |
|
|
HA static pressure | Indicates the pressure value reading from the hot |
| aisle in relation to the external ambient |
| temperature |
|
|
CA wall temperature | Indicates the temperature from the wall sensor |
| located in the IT sections |
|
|
CA temperature combo | Indicates the average temperature from the wall |
| sensor and discharge temperature sensor |
CA relative humidity | Indicates the relative humidity percentage from the |
| wall sensor |
CA dew point | Indicates the dew point temperature from the wall |
| sensor |
|
|
CA static pressure | Indicates the pressure value reading from the IT |
| sections in relation to the external ambient |
| pressure |
|
|
CA discharge temperature | Indicates the discharge air temperature |
The AD detail screen displays the following operational parameters for each AHU: