Toshiba RAV-SM800XT-E, RAV-SM560XT-E service manual How to remove the Drain pan

No.	Part name	Procedures	Remarks
2	Front panel	6) Remove both side hooks and remove the	Hook
		Front panel by turn to air inlet part
		direction.

<How to install the Front panel>

	1)	In case of the Drain hose installation
		through the Front panel, install the opening
		base for piping in the Back body by a screw
		(M4 x 12). Prepare it by yourself.
	2)	Fit the Front panel in the Drain pan. Then
		fix it in the Drain pan with 2 hooks in the
		center of the air outlet.
	3)	Fix 5 hooks around the Front panel with
		conformation the Guide-rib is inserting into
		the Back body.
	4)	Fix 8 screws and close 3 Cap screws.
	5)	Install the Drain band into the Front panel.
	6)	Check the gap between the Front panel
		and the Back body.	Guide-rib
3 Drain pan	<How to remove the Drain pan>
assembly	1)	Remove the Air inlet grille and the Front
		panel. (1, 2)
	2)	Remove the Louver motor from the Drain
		pan.

3)	Remove the shaft of Horizontal louver.	Louver motor
		Electrical wire	LED base
4)	Remove the LED base and Electrical wire.

		Shaft of Horizontal lover
5)	Remove the TA sensor wire.	Drain hose	TA sensor
6)	Remove the Drain hose.

(Continue)

– 62 –