Toshiba RAV-SM800XT-E, RAV-SM560XT-E service manual Procedure Remarks

No.	Part name		Procedure		Remarks
‚ Front cabinet		1. Detachment		Motor support
		1)	Perform work of item 1 of •.
		2)	Remove screws (ST1T Ø4 x 10L, 2 pcs.)
			of the front cabinet and the inverter cover.
		3)	Take off screws of the front cabinet and
			the bottom plate. (ST1T Ø4 x 10L 3 pcs.)
		4)	Take off screws of the front cabinet and
			the motor support.
			(ST1T Ø4 x 10L, 2 pcs.)
			• The left side of the front side if made to	Front cabinet	For single-phase type models,
			insert to the rear cabinet, so remove it		also take off this screw
			pulling upward.
		3. Attachment		Front cabinet (Left side)
		1)	Insert hook at the left side of the front side
			into the rear cabinet.
		2)	Hook the lower part at the right side of the	Slit	Claw
			front to concavity of the bottom plate.
			Insert the hook of the rear cabinet into the
			slit of the front cabinet.

3)Attach the removed screws to the original positions.

Slit

Hook

Cord clamp

Front cabinet

Concavity at bottom plate

Lower slit

– 66 –