HP 2045 manual Readme file in the same directory on the CD-ROM

	Other Printing Problems
Problem	Causes, Descriptions, and Solutions
No transmission	Check using the following procedure:
when you use	A Confirm the IEEE 1394 interface cable is connected securely.
1394 interface con-
	B Restart the computer.
nection	If the error occurs even after executing the above operation, proceed to
	the following steps.
	C Unplug the IEEE 1394 interface cable connected to the computer.
	D Run the utility tool for the IEEE 1394 interface board, which is stored in
	the following path on the CD-ROM labeled “Printer Drivers and Utili-
	ties”:
	\UTILITY\1394\
	Reference
	For more information about using the utility tool for IEEE 1394, see
	the README file in the same directory on the CD-ROM.
	E Restart the computer.
Printing stops and	Follow the one of the procedures below:
a paper error is	• Press [Job Reset] on the display panel to stop printing. Place the custom
displayed if the	size paper in the bypass tray, and then start printing.
custom size paper
	• Select the paper feed tray with custom size paper, and then press [Con-
in the paper feed	tinue] to force printing.
tray is specified
when printing
with the Post-
Script 3 printer
driver.
When connecting	Confirm that USB Printing Support is installed on your computer.
the machine using	Reference
the USB 2.0 inter-
face, the first page	See “Installing the Printer Driver Using USB”, Printer Reference 1.
of a print job that
contains a large
volume of data is
printed, and the
rest of the pages
are not printed.

Note

❒If the problem cannot be solved, contact your sales or service representative.

4

31