Staple |
| ||
❒ Staple printing will be cancelled under the following conditions: |
|
| |
• If the number of staple jobs exceeds maximum. For information about the |
| ||
maximum number, see “Specification”, General Settings Guide. |
| ||
• If a paper size that cannot be stapled is selected. For information about pa- |
| ||
per sizes that can be stapled, see “Specification”, General Settings Guide. |
| ||
• If a paper type that cannot be stapled is selected. |
| ||
The paper types that can be stapled are plain and recycled. Labels, thick |
| ||
paper and OHP transparencies cannot be stapled. |
| ||
• If positions other than those fixed for stapling are specified. |
| ||
• If there are inconsistencies between the duplex folding direction and the |
| ||
staple position during duplex printing. |
| ||
• If paper sizes are mixed when a different paper size is specified during a |
| ||
print job. |
| ||
• When staples have run out. |
| ||
• When feeding paper from the bypass tray. |
| ||
• When staples have run out and when Auto Continue has been set, printing |
| ||
will continue without stapling after the message has been displayed. |
| ||
❒ When using the optional booklet finisher to staple 2 at Center, the print job |
| ||
6 | |||
will be cancelled if the staples run out. |
❒Paper sizes that can be stapled when using the Mixed Size mode are as fol- lows:
•A3 L and A4 K
•B4 L and B5 K
•11" ⋅ 17"L and 8 1 /2" ⋅ 11"K
49