Panasonic RP-WH5000 manual Maintenance, Product service, Specifications, Troubleshooting guide

Troubleshooting guide

Problem	Possible cause and suggested remedy
The DOLBY PRO	You have set the transmitter’s SURROUND button to “OFF” (	page
	13).
LOGIC II lamp does
not light.	There are no analog input signals, digital input signals (PCM) or Dolby
	Digital 2-channel signals being input.
The DOLBY PRO	There are analog input signals, digital input signals (PCM) or Dolby Digital
LOGIC II lamp lights	2-channel signals being input.

Maintenance

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner, or benzine to clean this unit.	ENGLISH
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.

The DTS lamp does not light.

You have selected “OFF” for the DVD player’s DTS digital output setting

( page 10).

•Set the DVD player’s DTS digital output setting to “ON”. You are playing a signal that is not recorded in DTS format.

The chapter being played is not DTS format.

The DVD player is not DTS compatible ( page 10).

•Use a DTS compatible DVD player.

Product service

Do not attempt to remove the cover(s) or repair the unit yourself. Refer servicing to qualified personnel only.

Product information

For product service, product information or assistance with product operation, refer to the servicenter directory.

Cannot charge The POWER/CHARGE lamp on the transmitter is not on ( page 8).

•Check that the headphones are put on the transmitter correctly.

Dry cell batteries are inserted (	page 9).
• Insert the supplied nickel-metal hydride rechargeable batteries.

Specifications

Nickel-metal hydride rechargeable batteries other than those supplied are
inserted.
• Insert the supplied nickel-metal hydride rechargeable batteries or nickel-
metal hydride rechargeable batteries with the same product number
(	page 7).

Infra-red	A noise signal is being received from the connected equipment.
	• Turn off the power on the connected equipment.
ray output does not
stop.

RQT8164

18

Transmitter (RP-WH5000T)

Decoder function

Dolby Digital

Dolby Pro Logic II

DTS

MPEG-2 AAC

Surround function

OFF

CINEMA

MUSIC

VOICE

Modulation system

Digital infrared transmission

Transmitting frequency

3.75 MHz

Transmitting distance

8 m (26 ft.) (approx.)

Frequency response

18 Hz – 22,000 Hz

Distortion factor

Less than 0.1% (1 kHz)

Audio input

Optical digital input (TOS Link type) x1 Analog input (RCA type, left/right) x1

Power supply

	DC 6 V (using AC adapter, included)
Dimensions (WxHxD)
	147 mm x197 mm x147 mm
Mass	(5–13/16 in. x 7–3/4 in. x 5–13/16 in.)
	334 g (11.8 oz.) (approx.)

Headphones (RP-WH5000H)

Frequency response

18 Hz – 22,000 Hz

Power supply

Supplied rechargeable nickel-metal hydride batteries or commercially available (size AA) batteries

Mass

312 g (11.0 oz.) (approx.), including supplied rechargeable nickel-metal hydride batteries

AC Adapter (RFX5176)

Input

AC 110-240 V, 50/60 Hz

Output

DC 6 V, 1 A

Power consumption

10 W

Power consumption of the AC adapter in standby mode

(when connected to the transmitter)

approx. 1.3 W

NOTE	RQT8164
Specifications are subject to change without notice.

Mass and dimensions are approximate. 19

18 19