Samsung AF0AKV3SAEENSG manual Troubleshooting

USING PARTS

Troubleshooting

PROBLEM

SOLUTION

Check if the air conditioner is off. Turn the air conditioner on and set

Timer function is

the Timer function.

not working.

When the timer is already set icon will appear on the indoor unit

display, check to see if the timer is already set.

Odor may permeate depending on the surrounding environment or

Odors permeate in

operating condition. Ventilate the indoor air or operate Fan mode for

the room during

1~2 hours if the odor does not go away. (Parts of the air conditioner

operation.

does not generate any odor)

Clean the air filter if it is dirty.

If the message

,

,

,

,

,

,

,

,

Error is indicated.

,

,

,

,

,

,

,

,

,

,

blink on the indoor unit display, it means there is a problem so you

should contact a service center.

Depending on the status of the air conditioner usage (especially when

Noise is generated.

the outdoor temperature is below 20°C), noise can be generated due to

changes in refrigerant flow. You don’ t have to worry since it is normal.

Water is dropping

from the

Water may be generated because of the temperature difference. It is

connection part of

normal.

the drain pipe.

Press the On/Off button and check if the display keeps blinking.

Indoor unit display

Turn off the auxiliary power switch and turn it on.

is blinking.

If the display keeps blinking after following above 2 instructions,

contact the service center.

Heat is generated

from the control

When the air conditioner is on, little bit of heat may be generated from

panel on the indoor

the control panel. It is normal.

unit.

Air conditioner is

After turning off the air conditioner, it may generate breeze for certain

not turning off.

period of time for defrosting. It is normal.

28English