Timer function
Setting the On timer
When the air conditioner is turned off.
1Press the Timer button to select (On).
– (On) indicator will keep blinking and you can set the time.
2 Press the < or > button to set the time.
USING
Remote controller
display
–You can set the time in half hour unit from 30 minutes (0.5 on the display) ~ 3 hours and hour unit from 3 ~ 24 hours.
–Time can be set from minimum 30 minutes to maximum 24 hours.
3Press the SET button to complete the On timer setting.
–(On) indicator and the set time of the timer will be displayed on the remote controller display.
–On timer setting will be cancelled if you don't press the SET button within 10 seconds after setting the time. Therefore, check for the (On) indicator on the remote controller display.
•Press the Timer button → select (On) →
Cancel press the < or > button → set the timer to
→ press the SET button.
PARTS
Additional options available in On timer
Select the mode from (Auto) → (Cool) → (Dry) and → (Fan).
•Heat mode is not supported by this model.
You can adjust the temperature after timer setting is completed.
Temperature adjustment is only available in Auto/Cool/Dry mode. In Fan mode, temperature cannot be adjusted.
•Heat mode is not supported by this model.
NOTE
•When On timer setting is completed, the set status will be displayed for 3 seconds, and then only (On) indicator will remain on the remote controller display thereafter.
•You cannot set the Fan speed when setting the On timer.
English 21