TABLE OF CONTENTS
SECTION | DESCRIPTION | PAGE |
1.0) | Safety | 2 |
2.0) | Installer Responsibility | 2 |
3.0) | General Information | 2 |
4.0) | Minimum Clearances to Combustibles | 4 |
5.0) | Specifications | 5 |
6.0) | Packing List | 5 |
6.1) | Accessory Packages | 9 |
7.0) | Typical Layouts – PTS/U Series | 11 |
7.1) | Typical Assembly Layout | 12 |
8.0) | Dimensions – PTS Series | 13 |
8.1) | Dimensions – PTU Series | 14 |
8.2) | Heater Assembly / Joining of Tube Sections | 15 |
9.0) | Typical Suspension Methods | 17 |
10.0) | Assembly of Tube Sections | 18 |
10.1) | Assembly of Extension Section | 19 |
10.2) | Inserting Turbulators | 20 |
10.3) | Adding Body Reflectors | 21 |
11.0) | Adding Optional 90º Elbow (PTS Only) | 22 |
11.1) | Adding Optional Corner Reflector (PTS Only) | 22 |
11.2) | Adding 180º | 23 |
11.3) | Adding Optional | 23 |
12.0) | Attaching Control Box Assembly | 24 |
12.1) | Connecting The TISS System | 25 |
13.0) | Gas Connections And Regulations | 28 |
14.0) | Instructions For Pressure Test Gauge Connection | 30 |
15.0) | Electrical Connections | 31 |
16.0) | Venting | 34 |
17.0) | Air For Combustion | 38 |
17.1) | Direct Outside Air For Combustion | 38 |
18.0) | Lighting and Shutdown Instructions | 40 |
19.0) | Sequence of Operation | 40 |
20.0) | Burner Component Location | 41 |
21.0) | Cleaning And Annual Maintenance | 42 |
22.0) | Troubleshooting Guide | 43 |
23.0) | Replacing Parts | 46 |
23.1) | Removal of Main Burner And Electrodes | 46 |
23.2) | Removing Gas Valve And Manifold Assembly | 47 |
23.3) | Air Switch Pressure Check | 47 |
23.4) | Ignition System Checks | 48 |
24.0) | Installation Data | 49 |
25.0) | Replacement Parts Guide | 50 |
This heater complies with ANSI Z83.20 (current standard) and CSA 2.34. Copies of the National Fuel Gas Code (ANSI
Form #43343330 |
|
May 08 |