Samsung SSA-S2000W user manual Reader Mode Setup RF + P/W, Reader Mode Setup PIN only

READER MODE SETUP (RF + P/W)

No Master Card or Master PIN is ever registered.

If you remember the Master Card or the Master PIN was registered, initialize the product and try again.

1.When you turn on the product, all of the 3 LED indicators will flash with a beep.

•No flashing of the 3 indicators denotes that the reader mode is already specified.

2. Press Button 0 and Button 2 in sequence and press ENT .

3.Present a card that you want to register as the Master Card to the device. When the Master Card is registered, only the red LED indicator flashes.

4.Present a card to the device, enter the 4-6 digit password and press ENT .

If you don’t want to register the cards right now, simply jump to Step 5 above without through Step 4 above.

5.Present the registered Master Card to the product once again.

6.The device enters Standby mode with only the orange LED indicator flashing.

X Y Z

[\ ] ^ _ `

lzj W lu{

iŒ““

zzhTzYWWW

READER MODE SETUP

X Y Z

Î

X Y Z

Î

X Y Z

Î

X Y Z

]

[

\

]

[

\

]

tˆš›Œ

\

]

`

^

_

`

^

_

`

`

tˆš›Œ™Gjˆ™‹

W lu{

lzj

W

lu{

lzj

W

lu{

lzj W

lu{

lzj

™Gjˆ™‹

iŒ““

iŒ““

iŒ““

iŒ““

zzhTzYWWW

zzhTzYWWW

zzhTzYWWW

zzhTzYWWW

READER MODE SETUP (PIN ONLY)

No Master Card or Master PIN is ever registered.

If you remember the Master Card or the Master PIN was registered, initialize the product and try again.

1.When you turn on the product, all of the 3 LED indicators will flash with a beep.

•No flashing of the 3 indicators denotes that the reader mode is already specified.

2. Press Button 0 and Button 3 in sequence and press ENT .

When the mode is specified, only the green LED indicator flashes.

3.Enter the 4-6 digit Master PIN number and press ENT .

When the Master PIN is registered, only the red LED indicator flashes.

X Y Z

[\ ] ^ _ `

lzj W lu{

iŒ““

zzhTzYWWW

4.Enter a PIN number to register (4-6 digits) and press

Repeat the step above if you want to register PIN numbers with the device in sequence.

If you don’t want to register the PIN number right now, simply jump to Step 5 above without through Step 4 above.

5.Enter the 4-6 digit Master PIN number again and press ENT .

6.The device enters Standby mode with only the orange LED indicator flashing.

English _ 19