user management
TO REGISTER CARDS IN RF ONLY MODE
Ensure that you must have registered the Master Card and the device is specified in RF ONLY mode.
1.Present the Master Card to the device.
When the mode is specified, only the green LED indicator flashes.
2. Press Button 1 and Button 1 in sequence and press ENT .
When the device enters Standby, only the red LED indicator flashes.
3.Present a card to the device, it will be registered with a beep. Repeat this step if you want to register multiple cards.
4.Present the Master card to the device again, and the device will switch to normal mode. If no input is made for 20 seconds, the device will switch to normal mode.
tGj
X Y Z
\ ]
`
lzj W lu{
i
zzhTzYWWW
USER MANAGEMENT
X | Y | Z | Î | X | Y | Z | Î | X | Y | Z |
[ | \ | ] | [ | \ | ] |
| \ | ] | ||
^ | _ | ` | ^ | _ | ` |
|
| ` | ||
| W |
|
| W |
| tGj | W |
| ||
lzj | lu{ |
|
| lu{ |
| |
| |||
|
|
|
|
| lzj |
| lu{ | |||
i |
|
|
| i |
|
|
| i |
|
|
|
| zzhTzYWWW |
|
|
| zzhTzYWWW |
|
|
| zzhTzYWWW |
REGISTERING CARDS IN A COMBINATION OF RF AND P/W MODES
Ensure that you must have registered the Master Card and the device is specified in RF + P/W mode.
1.Present the Master Card to the device.
When the mode is specified, only the green LED indicator flashes.
2. Press Button 1 and Button 2 in sequence and press ENT .
When the device enters Standby, only the red LED indicator flashes.
tGj
X Y Z
\ ]
`
lzj W lu{
3.Present a card to the device, enter the
4.Present the Master card to the device again, and the device will switch to normal mode.
If no input is made for 20 seconds, the device will switch to normal mode.
i
zzhTzYWWW
X | Y | Z | Î | X | Y | Z | Î |
[ | \ | ] | [ | \ | ] | ||
^ | _ | ` |
| ^ | _ | ` |
|
lzj | W | lu{ |
| lzj | W | lu{ |
|
i |
|
|
| i |
|
|
|
|
| zzhTzYWWW |
|
|
| zzhTzYWWW |
|
X Y Z
[\ ] ^ _ `
lzj W lu{
i
zzhTzYWWW
Î
tGj
X Y Z
\ ]
`
lzj W lu{
i
zzhTzYWWW
English _ 21