Samsung SSA-S2000W user manual To Specify the Delayed Start Time in Secure Mode

TO SPECIFY THE KEYPAD INPUT SUSPENSION TIME IF THE RETRY COUNT WITH AN UNREGISTERED ID EXCEEDS THE LIMIT

1.Present the Master Card to the device.

2. Press Button 6 and Button 0 in sequence and press ENT .

3.Enter the two-digit keypad input suspension time (unit: minute) and press ENT .

•The default is set to “01”.

You can specify a time from 01 to 99 minutes.

	X	Y	Z
		\	]
			`
tˆš›Œ™Gjˆ™‹	lzj	W	lu{
	iŒ““
			zzhTzYWWW
	X	Y	Z

BASIC SETUP

M You can specify the time of the keypad input suspension (followed by an alarm) if

an unregistered user keeps trying to open the door for certain times (the code number is set to “82”.

TO SPECIFY THE DELAYED START TIME IN SECURE MODE

[\ ] _ `

W lu{

iŒ““

zzhTzYWWW

1.Present the Master Card to the device.

2. Press Button 8 and Button 0 in sequence and press ENT .

3.Enter the two-digit delayed start time (unit: minute) and press ENT .

•The default is set to “00”.

tˆš›Œ™Gjˆ™‹

X Y Z

\ ]

`

lzj W lu{

iŒ““

zzhTzYWWW

X Y Z

[ \ ]

^ _ `

lzj W lu{

iŒ““

zzhTzYWWW

M See the table below for your reference.

Secure Mode	When the last person set the Secure mode before exiting the office, the external sensors will
	get activated since then.
	If the external sensors get activated right after you set the Secure mode, your motion will be
Delayed Start	detected before you can get out of the secure area, which will trigger the alarm. Thus, it is
	recommended to set the Secure mode to get activated after a certain time.

Enter the delayed start time by the minute; the sensor operation in Secure mode must have been specified in advance. (Refer to “Alarm Operation Time for Auxiliary Input” on pages 31-32)

English _ 25