Samsung SSA-S2000W user manual Contents

contents

PRODUCT INTRODUCTION	6	Features
6	7	What’s included
	8	At a Glance
	9	Cable Color Scheme
INSTALLATION AND EXTERNAL	10	Installing the rear template
CONNECTION	11	Cable Selection
10	12	Bypass Diode Connection
	12	I/O Connection
	14	External Reader Connection
INITIALIZATION	15	Basic Operations
15	16	Wiegand Output Setup
	16	Initialization
	17	Forced Initialization with External Line
	17	Hardware Forcible Initialization
READER MODE SETUP	18	Reader Mode Setup (RF ONLY)
18	19	Reader Mode Setup (RF + P/W)
	19	Reader Mode Setup (PIN ONLY)
	20	Reader Mode Setup (RF/PIN Combination
		Mode)
	20	Enabling Keypad Input for the Card Number
USER MANAGEMENT	21	To register cards in RF ONLY mode
21	21	RegIsterIng cards In a combInatIon oF RF
		and P/W modes
	22	to regIster cards In PIn mode
	22	regIsterIng cards In rF card / PIn combInatIon
		mode
	23	to delete a regIstered card or PIn number
BASIC SETUP	24	Duress Alarm
24	24	To specify the retry count for an unregistered
		ID
	25	To specify the keypad input suspension time
		if the retry count with an unregistered ID
		exceeds the limit
	25	To specify the delayed start time in Secure
		mode
	26	To specify the operation time of the Door
		Contact Sensor
	26	To specify the limited time for the keypad
		input
	27	To specify the alarm output port for the
		dismantled device
	27	To open or close the entry door
	28	To set or release the QUICK mode
	28	To set or release the Toggle mode for the
		door relay
	29	To specify the output time if the card is
		authenticated

4_ Contents