additional features
MUTE
You can mute the keypad tone or melody in normal operation.
1.Present the Master Card to the device.
2. Press Button 5 and Button 1 in sequence and press ENT .
•To release the setting, repeat Step 1 above, select the
< 5 2 > buttons and press ENT .
M By default, it is set to “enabled”.
TO SPECIFY THE USE OF THE TAMPER ALARM
X Y Z
\ ]
`
t
Gj | lzj W lu{ |
|
|
| i |
| zzhTzYWWW |
X Y Z
[ \ ]
_ `
lzj W lu{
i
zzhTzYWWW
You can maintain the alarm setup in normal operation and release it in case of a service repair requiring the dismantlement of the device. You must set the alarm mode when you have installed the device.For the alarm output port settings, refer to “To specify the alarm output port for the dismantled device” on page 27.
1.Present the Master Card to the device.
2. Press Button 8 twice and press ENT .
•To release the alarm setting for the dismantled device, repeat Step 1
above, select the < 8 9 > buttons and press ENT .
tGj
X Y Z
\ ]
`
lzj W lu{
i
zzhTzYWWW
M The default is set to “disabled”.
You can release the alarm for the dismantled device by presenting the Master Card or a registered card.
X Y Z
[\ ] 
_ `
lzj W lu{
i
zzhTzYWWW
38_ Additional Features