Honeywell K14114 3/06 Rev.B setup guide Zone List Menu Mode

LYNXR-I Installation and Setup Guide

✻81 Zone List Menu Mode

While in Program mode, press ✻81 to enter Zone List Menu Mode. This mode is used to program zone lists for output devices (programmed in ✻80 menu mode) or Chime-by-Zone in Zone List 3.

NOTES:

•Any list may include any or all of the systems zone numbers.

•A zone list can be assigned to more than one Powerline Carrier Device.

The prompts for *81 are as follows:

81

Zone List Programming-------------------- Main Menu prompt

A01

b

C

d

E

Zone List Number ---------------------------	for entering the zone list number to be programmed
Zone Entry to List ---------------------------	for entering zones to the assigned zone list
Delete Entire List? --------------------------	for deleting the entire zone list and its contents
Delete Specific Zones From List?--------	Selects whether to delete zones or return to next zone
	list number
Delete Zones -----------------------------------	for deleting specific zones from the current zone list

The following explains these prompts in detail. The left two columns identify the prompts and list the available entries. The right-most column provides a further explanation of the entries.

Notes: (1) Entering a number other than one specified will give unpredictable results.

(2)Do not assign zones with zone types 20, 21 or 22 to a zone list.

		Zone list programming	Pressing 1 advances to the next prompt below.
	8I	0 = exit mode	Pressing 0 exits mode, upon which this prompt blinks, indicating the
			mode is inactive.
		1 = enter mode
		Zone list number	Enter the Zone List Number 01, 02, or 03 to program (or 00 if no
A	0I	01-03 = zone list number to be programmed	zone lists are used).
		00 = exit Zone List mode
		[✻] = continue
		Zone entry to list	Enter each zone number to add to the zone list by first entering the
b	zz	01-41, 95, 96, 99 = zone numbers to add to zone	zone number, then the [✻] key (for example, 01✻ 02✻ 03✻). The
			system will announce the Voice Descriptor for the selected zone, if it
		list
		[✻] = accept zone number and enter the next zone	is programmed. After all desired zones are enrolled, enter “00” to
			advance.
		number
		00 = accept zone number(s) and continue to next
		prompt
		Delete entire zone list?	To delete the zone list, enter “1”. All zones in the zone list will be
C		0 = don’t delete; continue to next prompt	deleted automatically and programming will return to the ZONE
			LIST NUMBER prompt.
		1 = delete the current zone list
			To save the zone list or delete specific zones from the list, enter “0”.
		Delete zones from list?	To save the entire zone list, enter “0” and programming will return
d		1 = continue to delete zones prompt	to the ZONE LIST NUMBER prompt.
			To delete a zone or zones in a zone list enter “1”.
		0 = don’t delete; continue to next zone list number
		prompt (A….01)
		[#] = return to zone list number prompt (A….01)
		Delete zones	When deleting a zone(s) from the zone list, if the selected zone has a
E		Enter each 2-digit zone number to be deleted from	Voice Descriptor programmed, upon deletion it will be announced as
			a confirmation that it has been deleted. After all zones to be deleted
		the current zone list, followed by the [✻] key.
		[✻] = delete zone and enter next zone to be	are entered, enter “00” to return to the ZONE LIST NUMBER
			prompt so that another list can be programmed, if desired.
		deleted
		00 = delete zone and return to next zone list
		number prompt (A….01) desired

- 37 -