Honeywell K14114 3/06 Rev.B setup guide Setting DIP Switches on the 5800RL Transmitter

LYNXR-I Installation and Setup Guide

5800 Series Transmitter Loop Numbers (Refer to this information when programming transmitters)

The following illustration shows the compatible transmitters, their associated input types and loop designations.

	LOOP 3
LOOP 4				LOOP 4
YOU MUST	LOOP 2			YOU MUST
ENROLL				ENROLL
			LOOP
THIS	LOOP 1	LOOP		THIS
BUTTON		1	1	BUTTON

		LOOP 3
ON	OFF	LOOP 2

LOOP 1 LOOP 3

	LOOP 2
	LOOP 4
	YOU MUST
	ENROLL
	THIS BUTTON
•••	LOOP 1
••••
•••••
•••
••••

5800RL		5800WAVE		5801
SET		PROGRAM		ENROLL AS
HOUSE ID		HOUSE ID		"UR" OR "RF"
LOOP 1		LOOP 1		LOOP 1
5806/5807/5808/5808LST		5809		5814
ENROLL AS "RF"		ENROLL AS "RF"		ENROLL AS "RF"
	LOOP 2		LOOP 2
			(REED)
	(REED)
			LOOP 3
			(TERMINALS)	LOOP 1
LOOP 1				(INTERNAL
		LOOP 1		SHOCK
	LOOP 3			SENSOR
		(TERMINALS)
(TERMINALS)
5 8 1 8		5819	5819S (WHS & BRS)
ENROLL AS "RF"	ENROLL AS "RF"		ENROLL AS "RF"

	5802 MN	5802 MN2	5804/5804E	5804BD/5804BDV
	ENROLL AS	ENROLL AS	ENROLL AS "BR"	ENROLL AS "BR"
	"UR" OR "RF"	"UR" OR "RF"		PROGRAM HOUSE ID
	LOOP 2			LOOP 1
				(PRIMARY)
	(REED)
		LOOP 2
		(REED)		LOOP 2
	LOOP 1	LOOP 1		(AUX.
				CENTER)
	(TERMINALS)		LOOP 1
		(TERMINALS)
			(TEMP
		ALTERNATE
			SENSOR)	LOOP 3
		POSITION
				(AUX.
		FOR LOOP 2
				RIGHT)
	5816	5816MN	5816TEMP	5817
ENROLL AS "RF"		ENROLL AS "RF"	ENROLL AS "RF"	ENROLL AS "RF"
ARMED
READY	MESSAGEMIC
		LOOP 1		LOOP 1
		(SOUND)
				(MOTION)
			(Green)
			(Red)
			(Yellow)
	5828/5828V	5849	5850 (GBD)	5 8 9 0 / 5 8 9 0 P I
	PROGRAM	ENROLL AS "RF"	ENROLL AS "RF"	ENROLL AS "RF"
	HOUSE ID			01009-012-V4

Notes:

UL

(1)Loop 4 must be enrolled on the 5801, 5804, 5804BD, 5804BDV and 5804E transmitters, whether or not the loop is used.

(2)5804E encrypted (High-Security) devices must be activated while the system is in Go/No Go Test Mode. Refer to the transmitter’s installation instructions for complete details. The system will confirm enrollment of the encrypted device by beeping two times.

The 5800RL, 5802MN, 5802MN2, 5804, 5804BD, 5804BDV, 5804E, 5814, 5816TEMP, 5819, 5819S(WHS & BRS), 5828/5828V and 5850(GBD) wireless transmitters have not been evaluated by UL.

Setting DIP Switches on the 5800RL Transmitter

Set the 5800RL Transmitters to the programmed House ID, by using the DIP switches.

(OFF position is indicated by ---)

Note: The 5800RL cannot be used in conjunction with the Auto Arm (scheduled arming) feature.

						SWITCH UP FOR "ON"										5800RL DIP SWITCH TABLE
											House		DIP SWITCH POSITIONS						House		DIP SWITCH POSITIONS
											ID	2		3	4		5	6	ID	2	3	4	5	6
											0	---		---	---		---	---	16	ON	---	---	---	---
											1	---		---	---		---	ON	17	ON	---	---	---	ON
	1	2	3		4		5	6			2	---		---	---		ON	---	18	ON	---	---	ON	---
											3	---		---	---		ON	ON	19	ON	---	---	ON	ON
											4	---		---	ON		---	---	20	ON	---	ON	---	---
											5	---		---	ON		---	ON	21	ON	---	ON	---	ON
SW-1 ACTIVATES				SW-6 SETS							6	---		---	ON		ON	---	22	ON	---	ON	ON	---
									SWITCH DOWN		7	---		---	ON		ON	ON	23	ON	---	ON	ON	ON
MODE SETTING							MODE
											8	---		ON	---		---	---	24	ON	ON	---	---	---
									FOR "OFF"
											9	---		ON	---		---	ON	25	ON	ON	---	---	ON
											10	---		ON	---		ON	---	26	ON	ON	---	ON	---
			2-6 SETS HOUSE ID								11	---		ON	---		ON	ON	27	ON	ON	---	ON	ON
											12	---		ON	ON		---	---	28	ON	ON	ON	---	---
											13	---		ON	ON		---	ON	29	ON	ON	ON	---	ON
SHOWN SET FOR HOUSE ID# 12										01000-014-V1	14	---		ON	ON		ON	---	30	ON	ON	ON	ON	---
											15	---		ON	ON		ON	ON	31	ON	ON	ON	ON	ON

Setting 5800RL DIP Switches

- 15 -