Honeywell K14114 3/06 Rev.B setup guide Programming Default Tables

LYNXR-I Installation and Setup Guide

Programming Default Tables

(boldface indicates defaults that differ between tables)

Function		Table 1	Table 2	Table 3	Table 4
*20	Installer code	4112	4112	4112	4112
*21	Quick arm enable	1	1	1	1
*22	Keypad backlight timeout	0	0	0	0
*23	Forced bypass	0	0	0	0
*24	RF house ID code	0,0	0,0	0,0	0,0
*25	Powerline carrier device house code	0	0	0	0
*26	Chime-by-zone	0	0	0	0
*27	Real-time clock display	1	1	1	1
*29	Daylight saving time start/end month	4,10	4,10	4,10	4,10
*30	Daylight saving time start/end weekend	1,5	1,5	1,5	1,5
*31	Single alarm sounding per zone	0	0	0	0
*32	Fire sounder timeout	0	0	0	0
*33	Alarm bell timeout	1	1	1	1
*34	Exit delay	7,0	6,0	7,0	7,0
*35 Entry delay 1 (zone type 01)		3,0	4,5	3,0	3,0
*36	Entry delay 2 (zone type 02)	6,0	6,0	6,0	6,0
*37 Audible exit warning/quick exit		1,1	0,1	1,1	1,1
*38	Confirmation of arming ding	0	0	0	0
*39	Power up in previous state	1	1	1	1
*40	PABX access code	---	---	---	---
*41	Primary phone number	---	---	---	---
*42	Secondary phone number	---	---	---	---
*43	Primary subscriber account number	15,15,15,15	15,15,15,15	15,15,15,15	15,15,15,15
*44	Secondary subscriber account number	---	---	---	---
*46	“Follow Me Reminder” Phone Number	---	---	---	---
*47	Phone system select	5	5	5	5
*48	Report format	7,7	7,7	7,7	7,7
*49	Split/dual reporting	0	0	0	9
*50 15 second dialer delay (burglary)		0	1	0	0
*51	Periodic test report	0	3	0	0
*52	First test report offset	2	2	2	2
*53	Sescoa/radionics select	0	0	0	0
*54	Lack of usage notification	0	0	0	0
*55	Enable/Disable ECP interface	0	0	0	0
*56	Enhanced Zone programming	See *56 table	See *56 table	See *56 table	See *56 table
*58	RF jam detection	0	0	0	0
*59 Exit error report code		1	0	1	1
*60	Trouble report code	1,0	1,0	1,0	1,0
*61	Bypass report code	0,0	0,0	0,0	0,0
*62	AC loss report code	0,0	0,0	0,0	0,0
*63	Low battery Report code	1,0	1,0	1,0	1,0
*64	Test report code	1,0	1,0	1,0	1,0
*65	Open report code	0	0	0	0
*66	Arm away/stay report code	0,0	0,0	0,0	0,0
*67	RF transmitter low battery report code	1,0	1,0	1,0	1,0
*68	Cancel report code	1,0	1,0	1,0	1,0
*70	Alarm restore codes	1	1	1	1
*71	Trouble restore report code	1,0	1,0	1,0	1,0
*72	Bypass restore report code	0,0	0,0	0,0	0,0
*73	AC restore report code	0,0	0,0	0,0	0,0
*74	Low battery restore report code	1,0	1,0	1,0	1,0
*75	RF transmitter low battery restore report code	1,0	1,0	1,0	1,0
*76 Test restore report code		0,0	1,0	0,0	0,0
*77	Dynamic Signaling Delay/ Dynamic Signaling Priority	0,0	0,0	0,0	0,0
*80	Powerline Carrier Devices	See *80 table	See *80 table	---	See *80 table
*81 Zone lists for devices		See *81 table	See *81 table	See *81 table	See *81 table
*84 Assign zone voice descriptors			Refer to *84	Programming
*87 Auxiliary Function/ 1-button paging		0	1	0	1
*88	Pager characters	---	---	---	---
*89	Event log 80% full report code	0,0	0,0	0,0	0,0

- 62 -