Honeywell K14114 3/06 Rev.B setup guide Start Stop, Device Number, Event, System Operation

LYNXR-I Installation and Setup Guide

Programming Default Tables

✻56 ZONE ASSIGNMENT/ALARM REPORT CODES FOR TABLES 3 & 4

Zone No.	Zone Type	Alarm Code	Input Type	Loop Number		Zone Descriptor
2	1	1,0	3 (RF)	2	47, 04 (FRONT DOOR)
3	1	1,0	3 (RF)	2	33, 04 (BACK DOOR)
4	3	1,0	3 (RF)	2	80	(WINDOW)
5	3	1,0	3 (RF)	2	80	(WINDOW)
6	3	1,0	3 (RF)	2	80	(WINDOW)
7	3	1,0	3 (RF)	2	80	(WINDOW)
8	10	1,0	3 (RF)	1	56	(MOTION DETECTOR)
9	9	1,0	3 (RF)	1	22, 02 (SMOKE DETECTOR)
26	21	1,0	5 (BR)	3
27	22	1,0	5 (BR)	2
28	23	0,0	5 (BR)	4
29	23	0,0	5 (BR)	1
30	21	1,0	5 (BR)	3
31	22	1,0	5 (BR)	2
32	23	0,0	5 (BR)	4
33	23	0,0	5 (BR)	1
92	---	1,0	---	---
99	6	1,0	---	---

NOTE: Zone 2 to 41 are RF zones; Zone 92 is Duress; Zone 99 is keypad panic

✻80 DEFAULT TABLE: APPLIES TO DEFAULT TABLE 4 (devices 2-7 have no default values)

			Start			Stop
				Zone Type	Restore of	Zone type
Device Number	Action	Event	Zone List	System Operation	Zone List	System operation
1	2	2	1		2
8**	2			33		36

**NOTE: If using an X10 Powerhouse Security SH10A siren as device 8, you must change the device action default to “3” if using default table 4.

✻80 DEFAULT TABLE: APPLIES TO DEFAULT TABLE 1 and 2 (devices 1-7 have no default values)

			Start			Stop
				Zone Type	Restore of	Zone type
Device Number	Action	Event	Zone List	System Operation	Zone List	System operation
8**	2			33		36

✻81 ZONE LIST FOR OUTPUT DEVICES DEFAULT TABLE: Applies To Default Table 1 - 4.

Zone List 1	28, 32
Zone List 2	29, 33
Zone List 3	2, 3

- 64 -