Accepting/rejecting* a call
When the phone rings (ring tone can be heard in Headset), briefly press the Push4TM Button [2] once to accept the call. Press and hold the Push4TM Button [2] for 1 second to reject the call.
Initiating a call from your mobile phone
Dial the number as usual with your phone. If your Headset is on and the phone has been correctly paired, your phone will transfer the call to your Headset.
Initiating a call with voice dialling
You may be able to initiate the voice dialling function from your Headset (your phone will need to support voice dialling and voice tags need to be entered). To activate, briefly press the Push4TM Button [2]. You will then be able to speak the name of the person you wish to call.
Ending a call
Press the Push4TM Button [2] briefly dur- ing a call and the call will be ended.
Disconnecting from the phone*
You may wish to disconnect the Head- set from the phone in order to reduce battery consumption. To do so, press the Push4TM Button 3 times on the Headset when it is not in an active call. If you want to pick up a call, you first need to
Battery life
To conserve battery life, your Headset features an
switched on again normally.
When the battery has only 10% charge remaining, the Headset will produce an audible warning tone sequence every time a call is ended.
Resetting your Headset
Should your Headset stop responding, try charging it for a few seconds. Your Headset should now function again as normal.
5. PUSH4TM CALL*
Your Headset can be configured with a specific Push4TM call function. With the Headset on, press and hold the Push4TM Button [2] for 1 second to call directly to the configured number or phone service.
In some cases, you can use this function as your favourite number. To do so, you will first need to save your favourite number on the Headset. This can only be done when you have received a call (A) from this same num- ber into your Headset (not made through a hidden call). Once this received call has ended (B), press and hold both Vol+ [4] and Vol- [5] buttons for 3 seconds, until you hear a series of tones. The number from the last received call will be stored. (C)
Now you can make a direct call to this number at any time just by pressing and holding the Push4TM Button [2] for 1 second.
6. EXTENDED MENU
To activate the extended menu func- tions, press the Vol+ [4], Vol- [5] and Push4TM [2] Buttons until the Indicator
5